00198711-01_UM_X-Serie-S_EN.pdf - 第305页
Instruction manual SIPLACE X-Series S 6 Station extensions From software version 713.0 Edition 11/2019 6.1 Nozzle changer 305 6.1.4.2 T echnical data 6 Nozzle changer for the SIPLACE T winSta r Number of ma gazines Locat…
6 Station extensions Instruction manual SIPLACE X-Series S
6.1 Nozzle changer From software version 713.0 Edition 11/2019
304
6.1.4 Nozzle changer for the SIPLACE TwinStar
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 14 Nozzle changer for the SIPLACE TwinStar
6.1.4.1 Description
This nozzle changer can accommodate up to 12 nozzle magazines. There are two different mag-
azine types available: standard magazines and magazines for special nozzles or grippers. The
magazines are seated on a common support. They are centered with two parallel pins and fixed
in place with two countersunk screws.
Instruction manual SIPLACE X-Series S 6 Station extensions
From software version 713.0 Edition 11/2019 6.1 Nozzle changer
305
6.1.4.2 Technical data
6
Nozzle changer for the SIPLACE TwinStar
Number of magazines
Locations 1 and 3 6
Locations 2 and 4 6
max. 12 magazines for max. 24 nozzle garages
max. 10 magazines for max. 20 nozzle garages
Number of nozzle holders may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4 xx with adapter
5xx (standard)
9 xx with adapter
Special nozzle, gripper
6 Station extensions Instruction manual SIPLACE X-Series S
6.1 Nozzle changer From software version 713.0 Edition 11/2019
306
6.1.4.3 Configuration example: TwinStar for SIPLACE X4 S
One nozzle changer can be installed at each of the following locations for the TwinStar.
Nozzle changer at location 1, 3 and 4: 12 magazines
Nozzle changer at location 2: 10 magazines
This gives a total capacity of 2 nozzle changers with 22 magazines and a total of 44 nozzle ga-
rages.
6
Fig. 6.1 - 15 Position of nozzle changer for the SIPLACE TwinStar machine - configuration example (SIPLACE X4 S)
(1) Nozzle changer for the TwinStar
(2) TwinStar
(3) Stationary cameras
(4) SIPLACE MultiStar CPP
(5) Nozzle changer for SIPLACE Multistar CPP
(6) Nozzle changer row 2 for SIPLACE Multistar CPP (optional)
(4)
(5)
(5)
(4)
(1)
(2) (2)
(3)
(3)
(1)
(6)
(6)