00198711-01_UM_X-Serie-S_EN.pdf - 第81页
Instruction manual SIPLACE X-Series S 2 Operational safety From software version 713.0 Edition 11/2019 2.6 Safety features 81 2.6.3.2 Position of protective switches on the placement machine 2 Fig. 2.6 - 7 Position of pr…
2 Operational safety Instruction manual SIPLACE X-Series S
2.6 Safety features From software version 713.0 Edition 11/2019
80
2
Fig. 2.6 - 6 Position of buttons and switches - view of PCB input side (example of SIPLACE X2 S / X3 S / X4 S
shown)
(1) Start button (white)
(2) Stop button (black)
(3) EMERGENCY STOP button
(4) Button for docking and undocking the component trolley at the respective location
(T) PCB transport direction
(3)
(1)
(4)
(2)
(4)
Instruction manual SIPLACE X-Series S 2 Operational safety
From software version 713.0 Edition 11/2019 2.6 Safety features
81
2.6.3.2 Position of protective switches on the placement machine
2
Fig. 2.6 - 7 Position of protective switches on the placement machine (example of SIPLACE X4i S shown)
(1) Protective cover switch, location 1
(2) Protective cover switch, location 2
(3) Protective cover switch, location 3
(4) Protective cover switch, location 4
(5) Example service flap with protective cover switch at location 2 (optional at all locations)
(T) PCB transport direction
(2)
(3)
(1)
(4)
(5)
2 Operational safety Instruction manual SIPLACE X-Series S
2.6 Safety features From software version 713.0 Edition 11/2019
82
2.6.3.3 Description of functions
Main switch in OFF position (see item 1 in fig.
2.6 - 5, page 79) 2
The main power switch disconnects the three phases L1, L2, and L3 from the power supply.
2
2
Main switch in ON position 2
When the main switch is switched to ON, the mains voltage is switched through and all AC/DC
converters are addressed.
The control computer will start and all supply voltages will be made available internally. The inter-
mediate circuit voltages for the gantry axes (300 V-) and star axes (160 V-) plus the supply voltage
for the conveyor drives are also connected via the start button for safety purposes.
Start button, white (item 1 in fig. 2.6 - 5, page 79 and in fig. 2.6 - 6, page 80) 2
After switching on the main power switch you will be prompted to press the start button in order to
start the placement machine for placement jobs. The same prompt appears if you open the pro-
tective covers or the press the EMERGENCY STOP button.
Press the start button for at least 200 ms, up to a maximum of 1500 ms, and then let go. The
placement machine is switched on when you let go of the button.
DANGER
Incorrect handling of this placement machine can therefore result in death or severe in-
jury or considerable damage to equipment.
The following components still carry potentially lethal voltages even if the main power
switch is switched off:
– Cable connection terminals L1, L2, and L3 of the S1 main power switch
– Main input terminal X94
– The color of all individual wires, which still carry electricity, even if the main power
switch is switched off, is orange.
Always follow the applicable accident prevention and DIN regulations (particularly
EN 60204, part 1 or IEC 60204, part 1) and the applicable regulations in your own
country.
The safety door to the power supply must ONLY be opened by appropriately quali-
fied and trained personnel.
DANGER
Due to the use of energy storage devices in the power supply unit, hazardous voltages
are still present in parts of the power supply unit for approx. 5 minutes after turning off
the main switch and disconnecting from the mains power supply.