00198711-01_UM_X-Serie-S_EN.pdf - 第59页
Instruction manual SIPLACE X-Series S 2 Operational safety From software version 713.0 Edition 11/2019 2.2 Warning labels 59 2.2.12.1 High temperatures on the SIPLACE CPP 2 1 in fig. 2.2 - 12 , page 58 (quantity per SIPL…
2 Operational safety Instruction manual SIPLACE X-Series S
2.2 Warning labels From software version 713.0 Edition 11/2019
58
2.2.12 Warning labels on the SIPLACE MultiStar CPP
2
Fig. 2.2 - 12 Warning labels on the SIPLACE MultiStar CPP
(1) Temperature label, item no. 03031926-01
Item laser mark - risk class 2, item no. 03155298-01
(1)
Laser mark, risk class 2
Instruction manual SIPLACE X-Series S 2 Operational safety
From software version 713.0 Edition 11/2019 2.2 Warning labels
59
2.2.12.1 High temperatures on the SIPLACE CPP
2
1 in fig. 2.2 - 12, page 58 (quantity per SIPLACE CPP: 1)
2.2.12.2 Laser class 2 on the component sensor
2
Item laser mark - risk class 2 in fig. 2.2 - 12, page 58, item no. 03155298-01 (quantity per CPP: 1)
2
High temperatures on the SIPLACE CPP during continuous operation
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures during
continuous operation, if the ambient temperature is greater than 22°C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Risk class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
2 Operational safety Instruction manual SIPLACE X-Series S
2.2 Warning labels From software version 713.0 Edition 11/2019
60
2.2.13 High temperatures on the Head Control Unit (MHCU)
1 in fig. 2.2 - 13, temperature label, item no. 03031926-01 (quantity per placement machine: 4).
2
Fig. 2.2 - 13 Temperature label on the Head Control Unit (MHCU) - (example of SIPLACE X4i S shown)
2
RISK OF BURNS DUE TO HIGH TEMPERATURES!
The housing of the Head Control Unit (MHCU) can become hot during con-
tinuous operation. Take care when touching the Head Control Unit (MHCU).
(1)
(1)
(1)
(1)