00198711-01_UM_X-Serie-S_EN.pdf - 第257页
Instruction manual SIPLACE X-Series S 5 Tasks at the placement machine From software version 713.0 Edition 11/2019 5.7 Indicator lamps with horn 257 5.7.2.3 Configuration of two-color indicator lamp and a udio signal (op…
5 Tasks at the placement machine Instruction manual SIPLACE X-Series S
5.7 Indicator lamps with horn From software version 713.0 Edition 11/2019
256
5.7.2.2 Configuration of three-color indicator lamp with delay and audio signal
Fig. 5.7 - 4 Configuration of three-color indicator lamp and audio signal
Instruction manual SIPLACE X-Series S 5 Tasks at the placement machine
From software version 713.0 Edition 11/2019 5.7 Indicator lamps with horn
257
5.7.2.3 Configuration of two-color indicator lamp and audio signal (optional)
Fig. 5.7 - 5 Configuration of two-color indicator lamp and audio signal
5
5 Tasks at the placement machine Instruction manual SIPLACE X-Series S
5.8 Shift changeover From software version 713.0 Edition 11/2019
258
5.8 Shift changeover
5.8.1 Shift changeover tasks
Splice the tapes early. The feeder modules do not have to be refilled as soon as the new shift
starts. This minimizes extended down times.
At the shift change, pass important information on to the next operator. This includes, for in-
stance, changes to the placement program. Also read through the list of the descriptions of
the steps to take in section 5
, page 231.
Carry out a setup check.
Make sure that the feeder modules are equipped with the correct components, that they are
at the correct locations in the component trolley and that the conveyor increment is set cor-
rectly.
Clean the following line assemblies:
Empty the reject bin and carefully vacuum the area around the reject bin.
Carefully vacuum the nozzle changer, feeder modules and the component trolley.
Empty the waste tape container. Follow the safety instructions given in section 5.8.2, page
259
.
Empty the tray for the machine cover.