00198711-01_UM_X-Serie-S_EN.pdf - 第60页

2 Operational safety Instruction manual SIPLACE X-Series S 2.2 Warning labels From software version 713.0 Edition 11/2019 60 2.2.13 High temperatures on th e Head Control Unit (MHCU) 1 in fig. 2.2 - 13 , temperature labe…

100%1 / 360
Instruction manual SIPLACE X-Series S 2 Operational safety
From software version 713.0 Edition 11/2019 2.2 Warning labels
59
2.2.12.1 High temperatures on the SIPLACE CPP
2
1 in fig. 2.2 - 12, page 58 (quantity per SIPLACE CPP: 1)
2.2.12.2 Laser class 2 on the component sensor
2
Item laser mark - risk class 2 in fig. 2.2 - 12, page 58, item no. 03155298-01 (quantity per CPP: 1)
2
High temperatures on the SIPLACE CPP during continuous operation
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures during
continuous operation, if the ambient temperature is greater than 22°C.
Be careful when touching the parts.
2
2
2
LASER RADIATION
Risk class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
2 Operational safety Instruction manual SIPLACE X-Series S
2.2 Warning labels From software version 713.0 Edition 11/2019
60
2.2.13 High temperatures on the Head Control Unit (MHCU)
1 in fig. 2.2 - 13, temperature label, item no. 03031926-01 (quantity per placement machine: 4).
2
Fig. 2.2 - 13 Temperature label on the Head Control Unit (MHCU) - (example of SIPLACE X4i S shown)
2
RISK OF BURNS DUE TO HIGH TEMPERATURES!
The housing of the Head Control Unit (MHCU) can become hot during con-
tinuous operation. Take care when touching the Head Control Unit (MHCU).
(1)
(1)
(1)
(1)
Instruction manual SIPLACE X-Series S 2 Operational safety
From software version 713.0 Edition 11/2019 2.2 Warning labels
61
2.2.14 "Head crash" label on the IC camera of the TwinStar
"Head crash" label in fig. 2.2 - 14, item no. 03015392-02
(quantity per placement machine: maximum 2)
2
Fig. 2.2 - 14 "Head crash" label on the IC camera of the TwinStar
(1) Camera housing
(2) Glass plate
(3) "Head crash" label on the IC camera of the TwinStar
WARNING RISK OF HEAD CRASH 2
When changing the placement head from a TwinStar/VHF to a
SpeedStar, the SpeedStar collides with the camera housing.
Dismantle the stationary component cameras of type 33, 55 x 45,
and type 25, 16 x 16 for the TwinStar.
(3)