00198711-01_UM_X-Serie-S_EN.pdf - 第20页
1 Introduction Instruction manual SIPLACE X-Series S 1.2 Placement machine description From software version 713.0 Edition 11/2019 20 Three place ment method s are possible for processing the components: – Collect&Pl…
Instruction manual SIPLACE X-Series S 1 Introduction
From software version 713.0 Edition 11/2019 1.2 Placement machine description
19
1.2 Placement machine description
1.2.1 SIPLACE X4i S
1
Fig. 1.2 - 1 SIPLACE X4i S placement machine
The SIPLACE X4i S placement machine is distinguished by
– High precision,
– Intelligent placement optimization,
– Intelligent configuration strategies,
– Placement performance up to the high end process range
1 Introduction Instruction manual SIPLACE X-Series S
1.2 Placement machine description From software version 713.0 Edition 11/2019
20
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE X4i S placement machine has four gantries. The two gantries in placement area 1
and the two gantries in placement area 2 point inwards.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SIPLACE X4i S placement machine has two placement areas, one single conveyor or one
dual conveyor. Two boards can be placed at the same time on dual conveyors.
There are four locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks. At locations 2/3 or 1/4, the table positions for the rel-
evant placement area can be configured on the innermost or outermost position.
1.2.1.1 Overview of placement head configuration
1
CPP_H = SIPLACE Multistar CPP in high assembly position
CPP_L = SIPLACE Multistar CPP in low assembly position
Placement area 1 Placement area 2
C&P20 P / C&P20 P C&P20 P / C&P20 P
C&P20 P / C&P20 P CPP_L/CPP_L
C&P20 P / C&P20 P TH / TH
C&P20 P / C&P20 P CPP_H/TH
C&P20 P2 / C&P20 P2 C&P20 P2/C&P20 P2
C&P20 P2 / C&P20 P2 CPP_L/CPP_L
C&P20 P2 / C&P20 P2 TH / TH
C&P20 P2 / C&P20 P2 CPP_H/TH
CPP_L/CPP_L CPP_L/CPP_L
CPP_L/CPP_L CPP_H/TH
CPP_L/CPP_L TH / TH
Instruction manual SIPLACE X-Series S 1 Introduction
From software version 713.0 Edition 11/2019 1.2 Placement machine description
21
1.2.2 SIPLACE X4 S
1
Fig. 1.2 - 2 SIPLACE X4 S placement machine
The SIPLACE X4 S placement machine is distinguished by
– High precision,
– Intelligent placement optimization,
– Intelligent configuration strategies,
– Placement performance up to the high end process range
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE X4 S placement machine has four gantries. The two gantries in placement area 1
point to location 4. The two gantries in placement area 2 point to location 2.