00191369-01.pdf - 第123页
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts Software Version S R.501.xx Edition 01/99 3.3 User Interface - Views and M enus 121 *(0'HIDXOW V Y ou use thi s item to spec ify the G EM paramete…
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
120
NOTE
This function cannot be executed in "Operator" access mode.
Å Click the menu item "Load table program".
The program is loaded. (The loading process can take some time).
9LGHRLPDJH3$!$ OW
In the case of certain actions, it may be necessary to display the camera image of the MVS
system on-screen(vision evaluation unit) during assembly.
Å Click the menu item 9LGHRLPDJH!or press the key combination $/7+.
The display area is switched to the MVS system camera image in processing area 1.
Å Press then (6& key to restore the display area to the normal view.
9LGHRLPDJH3$!$ OW
Switch to the MVS system camera image in processing area 2.
&OXVWHUIRUILQHFDOLEUDWLRQ
In the "Stand alone" control mode, you can use this menu item to load the data of a selected
cluster (placement program) from the station computer’s hard disk.
NOTE
The data for the cluster selected in the box is designed for the assembly of special glass
components on a glass PCB. The assembled glass PCB is then used for fine calibration in
conjunction with the SITEST test program.
Å Click the menu item &OXVWHUIRUILQHFDOLEUDWLRQ
Å In the box which is now displayed, select the entry corresponding to the required cluster
and click 2. to confirm your selection.
The cluster data is now loaded.
NOTE
The menu item "Cluster for fine calibration ..." cannot be activated in the current version of the
SC software.
User’s Manual SIPLACE HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx Edition 01/99 3.3 User Interface - Views and Menus
121
*(0'HIDXOWV
You use this item to specify the GEM parameters which are used as the default parameters
when the station is switched on.
Å Click the menu item *(0'HIDXOWV
The window in which you set the GEM default parameters is now opened.
For a detailed description, refer to Chapter 13.
NOTE
This menu item cannot be activated in the current software version since the "GEM Interface"
option is not yet implemented.
3&%EDUFRGH
You use this item to display a dialog box with a list of the barcodes most recently read by the
PCB barcode reader.
This dialog box also informs you if an error occurred while reading the barcode, if the file
format is incorrect or if no data is available.
NOTE
You cannot call the menu item "PCB barcode ..." unless the PCB barcode reader has been
installed in the machine (see Chapter 12) and has been activated in the machine options.
Å Click the menu item 3&%EDUFRGH
The "PCB barcode" dialog box is opened.
3 Introduction and Basic Concepts User’s Manual SIPLACE HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx Edition 01/99
122
Å Click the 'HOHWHOLVW button if you want to delete all the entries in the list.
Å Click the &ORVH button to close the dialog box.
NOTE
The current status of barcode operation is displayed below the "Delete list" button. Barcode
operation is activated or deactivated in the LC program.
/DQJXDJH0HQX
You can use the "Language" menu to select between the language versions which are
integrated in the SC software.
You can chose between the languages "German", "English", "French", "Italian", "Simplified
Chinese", "Traditional Chinese", "Korean" and "Japanese".
Å Click the menu item corresponding to the required language.
The user interface texts are displayed in the selected language.