00191369-01.pdf - 第51页
User Manual HS-50 2 Operational Safety Software-Version 5.01Edition 01/99 2.1 Safety instructions 49 Å Keep the key for o pening the door s ben eath th e left and right o perati ng panels and the key for the ke y switc h…
2 Operational Safety User Manual HS-50
2.1 Safety instructions Software-Version 5.01 Edition 01/99
48
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.
8VHDVSUHVFULEHG
WARNING
The product must only be used for the applications specified in the catalogs and technical
descriptions, and then only in conjunction with non-Siemens devices and components that have
been recommended or approved by Siemens. For the product to operate correctly and reliably, it
must have been transported, stored, erected and assembled correctly and must be operated and
maintained with care.
,PSRUWDQWQRWHVRQRSHUDWLRQDOVDIHW\
WARNING
The following points MUST be observed in order to maintain operational safety:
Å NEVER open one of the protective covers if you are not totally familiar with the use and
functioning of the machine! Do not open the protective covers during operation unless you are
told to do so in this Manual or in the station software dialog.
Å The key switch must only be set to set-up mode ("I") by trained and qualified personnel.
Do not set turn the key switch to the position "I" (set-up mode) during operation unless promp-
ted to do so in this Manual or in the station software dialog
Å NEVER place your head or arms in the gantry travelling range while the station is switched on!
Å Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
Å The stations must always be set up, retooled and maintained by appropriately trained person-
nel.
Å Only use Siemens original spare parts and authorized accessories. The use of other parts will
affect safety and may invalidate the liability for any consequential damage.
Å The operational safety of SMD automatic placement systems can be guaranteed only if the sy-
stem is used as prescribed and in accordance with the instructions in the User/Service Manu-
als.
User Manual HS-50 2 Operational Safety
Software-Version 5.01Edition 01/99 2.1 Safety instructions
49
Å Keep the key for opening the doors beneath the left and right operating panels and the key for
the key switch in a place to which only qualified personnel have access.
Å If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in a Siemens service technician. Siemens AG will not accept
liability for any damage or consequential damage that is the result of incorrect work.
Å Machine operators must only carry out work for which they have been adequately trained and
with which they are totally familiar.
Å Always follow any safety regulations specific to your country.
Å Do not make modifications to the safety equipment. In particular, NEVER bypass circuit-brea-
kers or remove safety devices.
Å If particularly hazardous situations are identified while the machine is in use, the machine ow-
ner must immediately notify the manufacturer in writing so that appropriate action can be taken
to reduce the potential danger.
DANGER
This machine is electrically operated. When electrical devices are in use, certain parts carry dan-
gerous voltage levels. Switch off at the main switch and disconnect the placement system from
the power supply before carrying out any work on live components. There is a risk of death, severe
injury and/or considerable damage to equipment if these instructions are not followed.
WARNING
Despite all the safety measures taken by the manufacturer, severe injury (e.g. from the gantry)
and/or considerable damage to equipment may result if the placement system is operated incor-
rectly. For the machine to be safe, it must be used correctly by qualified personnel and all warn-
ings must be observed. Some work on the machine (e.g. setting up) requires training that goes
beyond the scope of this Manual.
2 Operational Safety User Manual HS-50
2.1 Safety instructions Software-Version 5.01 Edition 01/99
50
:DUQLQJVLJQVRQWKHSODFHPHQWV\VWHP
The following diagram shows the position of the warning signs on the basic machine.
Item 1 from the diagram showing the warning signs on the basic machine
:DUQLQJ
All parts marked with this sign
are still energized -
even when the main switch
is switched off !
1