00191369-01.pdf - 第315页
User’s Manual SIPLACE HS-50 7 What schould you do ... Software Vers ion SR.501.xx E dition 01/99 313 :KDWVFKRXOG\RXGR This cha pter contains a number o f subjec ts that are i ntended to help y ou during your da …
6 Vision functions User Manual HS-50
6.8 Recommendation for visually centering components Software-Version 5.01 Edition 01/99
312
So, set the ball radius on the station computer and then adjust the quality in the ’Measure’ menu.
– If no crosses are displayed on the ball, the radius is incorrect or the contrast is too high.
– If several crosses are displayed on a ball, then the radius has been entered incorrectly in the
’Measure’ menu.
PLEASE NOTE
We recommend that you select a radius on the line computer that is slightly larger than the
theoretical value and then adjust it in the ’Ball image’ menu.
6HWWLQJWKHFDVHVKDSHGLPHQVLRQSDUDPHWHUVRQWKHVWDWLRQFRPSXWHU
For high-contrast flip-chips and BGAs, you can reduce the physical case shape dimension to the
square surrounding the balls (’Case dimension’ option). This will reduce the measuring time, al-
though it can only be used for single measurements. Size mode must also be active.
9LVXDOO\FHQWHULQJIOLSFKLSV
6HWWLQJWKHSDUDPHWHUVRQWKHVWDWLRQFRPSXWHU
Under the’ Illumination Option’ in the ’Test Component Menu’, select:
– a value of around 50 for the medium illumination plane
– a value of around 20 for the steep illumination plane
User’s Manual SIPLACE HS-50 7 What schould you do ...
Software Version SR.501.xx Edition 01/99
313
:KDWVFKRXOG\RXGR
This chapter contains a number of subjects that are intended to help you during your daily work
on a SIPLACE line.
For example, you are provided with preventative measures that you can take to minimize the down
time on the machine to obtain the highest possible level of efficiency for the SIPLACE line during
production.
In addition, the tasks of the operator and of the line engineer are described in an operator and line
engineer profile, respectively, in this chapter.
7 What schould you do ... User’s Manual SIPLACE HS-50
7.1 Switching on the SIPLACE line Software Version SR.501.xx Edition 01/99
314
6ZLWFKLQJRQWKH6,3/$ & (OLQH
6ZLWFKLQJRQWKHOLQHFRPSXWHUVWDUWLQJWKHXVHULQWHUIDFHRIWKHOLQH
FRPSXWHUSURJUDP
Å Switch on the uninterruptible power supply (UPS).
The line computer software is uploaded.
The login dialog window appears on the screen after approximately 2 minutes.
Å Enter SOUin the "login" box and confirm your entry by pressing the RETURN key.
Å Enter the password in the "Password" box and press the RETURN key. If no password is re-
quired, then just press the RETURN key
The desktop (starting window) will appear on screen after approximately 3 minutes with the
overlying login box.
Å Enter the user name defined for your user account in the "User" box, and enter the correspond-
ing password in the "Password" box.
Å Click on 2N to confirm. The functions of the line computer program can now be executed ac-
cording to your access rights.
:KDW\RXVKRXOGFKHFNEHIRUHVZLWFKLQJRQWKHVWDWLRQV
ATTENTION
Carry out the steps described in the following before you switch on the stations.
Å Check to make sure that the stations are connected to power and to the compressed air supply.
Å Carry out a visual inspection of the stations. In particular, make sure that there are no obstruc-
tions in the traveling range of the gantries.
Å Make sure that the z-axes of all the heads are in the top end position.
Å Close the feeder covers and the protective covers.
Å Make sure that there is no diskette in the floppy drive of the station computer.