00191369-01.pdf - 第25页
User Manual HS-50 1 Introduction Software Version 5.01 01/99 Issue 1.6 The line concept 23 7KHOLQHFRQFHSW 2YHUYLHZ The place ment sys tem ca n be link ed to inpu t and ou tput statio ns, scree n printi ng sys…
1 Introduction User Manual HS-50
1.5 Description of the machine Software Version 5.01 01/99 Issue
22
The concept behind the automatic placement system
– with its stationary feeder modules,
– PCBs that do not move during placement
– and positionable placement heads
has a number of significant benefits:
– For example, the flexible 12-segment revolver heads combined with automatic nozzle
changers enable the nozzle configuration to be changed temporarily and automatically
adapted to receive different component sizes. You can also optimize the traversing paths
and the placement sequence.
– With stationary feeder modules, even the tiniest components are picked up reliably.
– The components cannot slip on the PCB during placement (as is often the case with mov-
ing PCBs) since the PCB does not move.
– Sophisticated optical centering systems (vision systems) for components and PCBs also
ensure high component positioning accuracy.
– Components can be topped up and tapes can be spliced without stopping the machine.
– Prepared component tables enable the placement system to be retooled without long stop-
pages.
7HFKQLFDOGDWDPDF KLQHRYHUYLHZ
Range of components From 0402 to PLCC44, SO32, DRAM
Maximum placement speed of the12-segment
revolver head 50,000 components/hour
Cycle time at the revolver head 125 ms, regardless of the type of component
Accuracy ± 90 µm at 4 sigma
± 135 µm at 6 sigma
PCB format 50 x 50 mm to 368 x 460 mm
2" x 2" to 14.5" x 18"
Feeding capacity Up to 96 tracks, each with 8 mm tapes
Feeder modules Tapes, bulk-cases
Operating system Microsoft Windows NT / RMOS
Combination options Inline or stand-alone
Space required 7.5 m² / module
User Manual HS-50 1 Introduction
Software Version 5.01 01/99 Issue 1.6 The line concept
23
7KHOLQHFRQFHSW
2YHUYLHZ
The placement system can be linked to input and output stations, screen printing systems,
soldering ovens and other automatic placement systems from the SIPLACE range (S-20, F4,
F5 and the SIPLACE G glue application station). All SIPLACE modules are supplied with the
necessary data by the UNIX line computer. The placement system can also be linked to a
higher level data processing system through the use of suitable interfaces.
7HFKQLFDOGDWDOLQHFRQFHSW
System SIPLACE placement lines
Module SIPLACE HS-50 / SIPLACE 80 S-20/
SIPLACE 80 F4 / SIPLACE 80 F5
Peripherals Input/output stations
Screen printers
Soldering ovens
Inspection stations, etc.
Range of components From 0402 * to 55 mm x 55 mm **
PCB conveyor Automatic width adjustment
PCB format 50 mm x 50 mm to 368 mm x 460 mm
Placement speed Depends on how the modules are connected to one another
Space required 4 m² / SIPLACE 80 modules
7.5 m² / SIPLACE HS-50 modules
* SIPLACE HS-50, SIPLACE 80 S-20 or SIPLACE 80 F4 with 12-segment revolver head
** SIPLACE 80 F4 / F5
1 Introduction User Manual HS-50
1.7 Connection data for the placement system Software Version 5.01 01/99 Issue
24
&RQQHFWLRQGDWDIRUWKHSODFHPHQWV\VWHP
(OHFWULFDODQGSQHXPDWLFFRQQHFWLRQSRLQWVRQWKHSODFHPHQWV\VWHP
1. Operating panel, left
2. Main switch
3. Safety doors to the power supply unit
4. Hole for the power cable
5. Operating panel, right
6. Safety doors to the compressed air unit
7. Hole for the compressed air line
8. LAN connection on the station computer
4
A
A
2
1
3
6
5
7
8