00191369-01.pdf - 第408页
12 Station Extensions - Software User’s Manual S IPLACE HS-50 12.2 GEM Interface Software Version SR.501.xx Edition 01/99 406 'HILQ LQJWKH*(0 GHIDXOW6HW WL QJV Y ou use the "GEM default s ettings..…
User’s Manual SIPLACE HS-50 12 Station Extensions - Software
Software Version SR.501.xx Edition 01/99 12.2 GEM Interface
405
2SHUDWLRQ
6HWWLQJWKH&RQWURO0 RGH
The control mode specifies how the station is supplied with the necessary placement data.
Å In the main view, select the 2SWLRQVmenu and then choose the &RQWUROPRGHoption.
Å The following selection box appears.
3RVVLEOH6HWWLQJV
6WDQGDORQH
(This control mode is used for test purposes only)
If a cluster is specified at the station, all necessary data will be loaded from the hard disk of
the station computer.
The data must be located on the station computer’s hard disk.
*(0+RVW
In this control mode only the host computer can specify the placement programs.
The data must be located on the host computer’s hard disk.
NOTE
This setting must be activated if you wish to download placement programs from the GEM
computer to the station computer. See also section 12.2.2.6.
/LQH&RPSXWHU
If a cluster is specified at the station, all necessary data will be loaded from the line computer.
The data must be located on the line computer’s hard disk.
6,3/$&(3UR
This control mode cannot be set in the current software version.
Å Select the button for the required control mode.
Å Click 2. to confirm and activate this setting.
12 Station Extensions - Software User’s Manual SIPLACE HS-50
12.2 GEM Interface Software Version SR.501.xx Edition 01/99
406
'HILQLQJWKH*(0GHIDXOW6HW WLQJV
You use the "GEM default settings..." menu option to make various settings which will be used
at power-up as default parameters for the station.
Å In the main view select the 2SWLRQVmenu and then select the option *(0GHIDX OWVHW
WLQJV. The following window is displayed.
User’s Manual SIPLACE HS-50 12 Station Extensions - Software
Software Version SR.501.xx Edition 01/99 12.2 GEM Interface
407
3RVVLEOHVHWW LQJV
&RQQHFWDWSRZHUXS
(See also section 12.2.2.5)
– <HV
When the station is switched on, the station computer attempts to connect to the host com-
puter.
– 1R
When the station is switched on, no connection to the host computer is made. However, the
operator can establish the connection manually in the "State view" (see also section 12.2.2.5
).
&RQWURO
(See also section 12.2.2.5)
– 2IIOLQH
It is not possible to send or receive messages.
– /RFDO
In the "Placement Program" view, the user can "upload" placement programs from the sta-
tion computer to the host computer (See also section 12.2.2.6
).
1R placement programs can be downloaded from the host computer to the station com-
puter.
– 5HPRWH
In the "Placement Program" view, the user can upload placement programs from the sta-
tion computer to the host computer and "download" from the host computer to the station
computer.
6SRROLQJ
(See also section 12.2.2.5)
– <HV
If the connection to the host computer is lost, the station will collect in a spooling file all mes-
sages intended for the host computer. Once the connection is re-established, the host can
pick up these messages from the station. The quantity of messages which can be stored
is limited by the size of the spooling file (20 MB).
– 1R
If the connection to the host computer is lost, all messages intended for the host computer
will be lost.