00191369-01.pdf - 第135页
User’s Manual SIPLACE HS-50 4 Placement Functions Software Vers ion SR.501.xx E dition 01/99 4.2 Error Display 133 (UURU'LVSOD\ The errors are liste d in tabul ar form acc ording to their t ype, and e ach type …
4 Placement Functions User’s Manual SIPLACE HS-50
4.1 Setup Display Software Version SR.501.xx Edition 01/99
132
5HILOOLQJDQ(PSW\7UDFN:LWK5HILOOWUDFN
As soon as a feeder in an empty track has been refilled with components, this fact must be
confirmed so that the placement head can access this track again. This is done with the help
of the "Refill track" function.
3URFHGXUH
Å The track barcode of the corresponding track is read in.
Å The component barcode of the corresponding component reel is read in.
The "Refill track" button is active when the barcodes match (see the following figure).
Å If the feeder in the current track is full, then click on the 5HILOOWUDFNbutton to confirm this
or read in the return barcode on the barcode bar.
Å Close the window with &ORVH.
User’s Manual SIPLACE HS-50 4 Placement Functions
Software Version SR.501.xx Edition 01/99 4.2 Error Display
133
(UURU'LVSOD\
The errors are listed in tabular form according to their type, and each type has its own view
containing its list of errors.
Å Click on the icon in the toolbar in the Main view.
The user interface switches to the error display (see Fig. 4.2 - 1
, Track errors, for example).
All errors of the current error type that have occurred are displayed in the display area.
Å If you want to switch the display area to a different type of error, then click on the icon for
the desired error type in the toolbar.
The display area switches to the selected error type.
(UURUW\SH LFRQ
–Track error
– Machine error
– Transport error
– General error
NOTE
The error that occurred last is always displayed in the top position in the table.
The error counter is incremented whenever the same error arises ("#E" column).
Information and an error diagnostics can be called up for every error displayed
(see Section 4.2.1 for this procedure).
4 Placement Functions User’s Manual SIPLACE HS-50
4.2 Error Display Software Version SR.501.xx Edition 01/99
134
)XQFWLRQV
The following functions described below can be executed by selecting the corresponding but-
tons in the views for the corresponding error type.
'HOHWHDOO
All entries in the table for the error type currently displayed are deleted with this function.
Å Click on the 'HOHWHDOO button
The error table is emptied.
(UURULQIRUPDWLRQ
This starts a help system that displays information on the possible causes of error for the sel-
ected error as well as corrective measures.
Å Select the entry in the table for the error for which you require additional information. The
line selected is highlighted in light blue in the table. The "Error information" button is now
active (see Fig. 4.2 - 1
, for example).
Å Click on the (UURULQIRUPDWLRQbutton
The help system window is opened.
The further procedure is described in Chapter 8 "Error information".
'LDJQRVWLFV
This starts the diagnostics system. You use this system to attempt to recognize the cause of
the current error and to correct this error together with the operator.
Å Select the entry in the table for the error for which you want to start the error diagnostics.
Å Click on the 'LDJQRVWLFV button.
The user interface switches to the Main view of the diagnostics system.
NOTE
The diagnostics system is not available in the current software version.