00198371-01_UM_SWS-EN.pdf - 第11页
User manual SIPLACE Wafer System (SWS) 1 Introduction Edition 04/2018 1.1 Overview 11 1.1.1 SIPLACE CA4 V2 with SWS V ario us changes in har dware and sof tware now ma ke it possible to operate th e SIPLACE CA4 V2 with t…
1 Introduction User manual SIPLACE Wafer System (SWS)
1.1 Overview Edition 04/2018
10
1.1 Overview
Fig. 1.1 - 1 SWS - view from back
1
Fig. 1.1 - 2 SWS - view from front
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
11
1.1.1 SIPLACE CA4 V2 with SWS
Various changes in hardware and software now make it possible to operate the SIPLACE CA4 V2
with the SIPLACE Wafer System (SWS).
The placement machine can be fitted with an SWS at one of the four locations, so that so-called
dies can be placed from wafers. This makes the components (dies) directly available to the place-
ment head, in wafers. Up to four SWS can be used with the SIPLACE CA4 V2. The SIPLACE CA4
V2 can also be operated with a combination of SWS and changeover tables or without an SWS
and with four changeover tables at the locations.
To ensure access to the installed SWS in the machine, a sliding cover has been fitted to the side
of each machine location.
For details, see the user manual for the SIPLACE CA4 V2, German [item no.: 00198381-xx], En-
glish [0198382-xx].
1
Fig. 1.1 - 3 SIPLACE CA4 V2 placement machine with one SIPLACE Wafer System (SWS)
(1) SIPLACE CA4 V2
(2) SIPLACE Wafer System (SWS) at location 2
(T) Direction of PCB transport
(1)
(2)
1 Introduction User manual SIPLACE Wafer System (SWS)
1.1 Overview Edition 04/2018
12
1.1.2 Serial number of the SIPLACE Wafer System
The serial number is located on the magazine lift, on the inside of the SIPLACE Wafer System.
1
Fig. 1.1 - 4 Position of typeplate with serial number
(1) Typeplate
(1)