00198371-01_UM_SWS-EN.pdf - 第85页
User manual SIPLACE Wafer System (SWS) 4 Setting up and commissioning Edition 04/2018 4.1 Delivery confi guration and transpo rtation of SWS 85 4.1.3 T ransporting the SWS withou t a crate or p allet 4.1.3.1 Safety instr…
4 Setting up and commissioning User manual SIPLACE Wafer System (SWS)
4.1 Delivery configuration and transportation of SWS Edition 04/2018
84
4.1.2 Transporting the SWS in a crate
4.1.2.1 Services
One of the services provided by ASM Assembly Systems GmbH & Co.KG is the complete inte-
gration of SIPLACE CA4 V2 into your production line. With our extensive expertise and by using
the right tools and equipment, we can ensure that the installation process runs smoothly and effi-
ciently. However, this will require you to clarify the infrastructure aspects in advance and make any
necessary changes at your production facility.
Please note that the safest way to transport the SIPLACE Wafer System is always in the transport
crate - or at the very least on the pallet. This will prevent serious damage to the SIPLACE Wafer
System caused by the feet colliding with obstacles, for example.
4.1.2.2 Safety instructions
4
4
4
4.1.2.3 Means of transport
To transport the SWS on the wooden pallet or in the transport crate, use a fork-lift truck with the
following specifications:
Fork length: Min. 1800 mm
Carrying power: Min. 1500 kg
Clear width between forks: Min. 420 mm 4
WARNING
Observe the applicable accident prevention regulations!
The applicable accident prevention regulations concerning the transportation of
heavy goods must be followed.
WARNING
Risk of tilting!
This risk of tilting occurs if the required specifications for the means of transportation are
not observed (section 4.1.2.3
)!
Always use the specified means of transportation.
WARNING
DANGER OF CRUSHING!
Risk of feet being crushed during transportation of the SIPLACE Wafer System.
Wear special protective shoes.
User manual SIPLACE Wafer System (SWS) 4 Setting up and commissioning
Edition 04/2018 4.1 Delivery configuration and transportation of SWS
85
4.1.3 Transporting the SWS without a crate or pallet
4.1.3.1 Safety instructions
4
4
4
4.1.3.2 Means of transport
Use a fork-lift truck or suitable hand lift with the following specification to transport the SIPLACE
Wafer System:
4
4
WARNING
Observe the applicable accident prevention regulations!
The applicable accident prevention regulations concerning the transportation of
heavy goods must be followed.
WARNING
DANGER OF CRUSHING!
Risk of feet being crushed during transportation of the SIPLACE Wafer System.
Wear special protective shoes.
WARNING
Damage to the SIPLACE Wafer System!
If transported without a transportation crate or pallet, the SIPLACE Wafer System could
be damaged.
Read this section through completely before transporting the machine.
Fork length Min. 1600 mm
Lifting power Min. 1500 kg
Outer fork width Min. 450 mm
Max. 520 mm
PLEASE NOTE
Hand lift specifications
The necessary width of the fork lift presents a critical measure.
Make sure that the hand lift used fulfills the specified requirements.
4 Setting up and commissioning User manual SIPLACE Wafer System (SWS)
4.1 Delivery configuration and transportation of SWS Edition 04/2018
86
4.1.3.3 Fork lift attachment points on the SWS
4
. 4
Fig. 4.1 - 2 Attachment points for fork-lift or hand lift on SWS
4.1.3.4 Points to be observed while transporting the SWS
4
WARNING
Only lift the SWS by its metal frame.
WARNING
Center of gravity for the SWS
Keep an eye on the SWS center of gravity (see section 3.2.6), particularly when mov-
ing it sideways.