00198371-01_UM_SWS-EN.pdf - 第14页
1 Introduction User manual SIPLACE Wafer System (SWS) 1.1 Overview Edition 04/2018 14 1.1.5 Failure to use as prescribed Failure to use the product as prescrib ed can result in both danger to life and limb and materia l …
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
13
1.1.3 EC Declaration of conformity
The product described below:
1
Manufactured by
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
conforms to the regulations and standards listed in the EC Declaration of
Conformity provided.
1.1.4 Use as prescribed
The product may only be used for the areas of application specified in the catalogs and technical
descriptions i.e. for the placement of components and may only be used together with the third
party devices and components recommended or approved by ASM Assembly Systems GmbH &
Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product
SIPLACE Wafer System
Type SWS 1/3 SWS 2/4
Item no.: 03076752-xx 03076751-xx
1 Introduction User manual SIPLACE Wafer System (SWS)
1.1 Overview Edition 04/2018
14
1.1.5 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. In the case of in-
correct usage,ASM Assembly Systems GmbH & Co. KG will not assume liability for any damage
which occurs and will not guarantee the correct and proper function of machine components.
Incorrect usage of the SIPLACE CA4 V2 includes:
– Operation of the SIPLACE Wafer System with safety equipment deactivated or removed.
– Operation of the SIPLACE Wafer System outside the SIPLACE CA4 V2.
– Pickup of components that do not meet the permitted specification.
– Use of wafer supports that have not been approved.
– Use of unauthorized accessories and additional modules.
– Use of the SIPLACE Wafer System by unqualified personnel.
– Unclear allocation of electrical connecting cables to each SIPLACE Wafer System and the
installed options.
– Persons accessing the SIPLACE Wafer System and protective covers.
1.1.6 Noise emissions
1
Max. noise emissions 75 dB (A)
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
15
1.1.7 Important notes on environmentally-friendly disposal of materials and com-
ponents
SIPLACE products are preferably manufactured using materials and parts that can be easily sep-
arated and disposed of in an environmentally-friendly way.
1
1.1.8 Electromagnetic compatibility (EMC)
The SIPLACE Wafer System is designed and tested for professional use in industrial applications.
Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.9 Note on original SIPLACE accessories
1
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.