00198371-01_UM_SWS-EN.pdf - 第16页
1 Introduction User manual SIPLACE Wafer System (SWS) 1.2 Description of functions Edition 04/2018 16 1.2 Description of functions 1.2.1 SIPLACE Wafer S ystem (SWS) function The new SWS pro vides a fully au tomatic wafer…
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
15
1.1.7 Important notes on environmentally-friendly disposal of materials and com-
ponents
SIPLACE products are preferably manufactured using materials and parts that can be easily sep-
arated and disposed of in an environmentally-friendly way.
1
1.1.8 Electromagnetic compatibility (EMC)
The SIPLACE Wafer System is designed and tested for professional use in industrial applications.
Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.9 Note on original SIPLACE accessories
1
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.
1 Introduction User manual SIPLACE Wafer System (SWS)
1.2 Description of functions Edition 04/2018
16
1.2 Description of functions
1.2.1 SIPLACE Wafer System (SWS) function
The new SWS provides a fully automatic wafer and chip handling system. It is fully integrated into
a SIPLACE CA4 V2 location. Each location can (with restrictions) be fitted with an SWS or with
an X table.
The SWS functions like a feeder for the SIPLACE system and transports the dies from the wafer
to a single, fixed pickup position for the placement head. The placement head picks the die up
from the SWS and places this on the board as done during SMD handling.
The SWS appears in SIPLACE Pro like an X table with a special feeder type. The programming
of this is the same as that for the SIPLACE CA4 V2. Die handling is programmed at a separate
terminal on the SWS. The main parameters to be programmed are as follows:
– Magazine type
– Wafer frame type
– Wafer and die dimensions
– Die recognition
– Die ejection parameters
– Link to SIPLACE Pro
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.2 Description of functions
17
1.2.2 Basic SWS Functions
The main die handling components are the wafer table, the magazine lift, the ejection system, the
flip unit and the control unit with corresponding SWS software.
The wafer with the relevant die is loaded from the magazine and fixed onto the wafer table. The
wafer table places the die using the ejector system, which releases the die from the wafer foil, and
transfers it to the flip unit.
The flip unit then processes this using two different functions:
– The flip unit rotates the die by 180° and makes this available for pickup by the placement
head.
or 1
– The flip unit transfers it to the die attach unit. The placement head approaches this and the
die is placed on the board in the same position as it was on the wafer.
The SIPLACE CA4 V2 uses a high precision SIPLACE placement head which has been specifi-
cally selected for maximum accuracy and fulfillment of all requirements in normal and restricted
conditions (see "Scope of delivery and services" for details of restrictions).
1
The following options are available to support the whole spectrum of process-oriented functions:
– Linear dipping unit
– Die attach unit
– Barcode scanner
– Wafer stretcher
– Inspection camera
PLEASE NOTE
All movable positioning axes in the SWS are servo axes!