00198371-01_UM_SWS-EN.pdf - 第15页
User manual SIPLACE Wafer System (SWS) 1 Introduction Edition 04/2018 1.1 Overview 15 1.1.7 Import ant notes on environmentally-fr iendly disposal of materials and com- ponent s SIPLACE products are pr eferably manufactu…
1 Introduction User manual SIPLACE Wafer System (SWS)
1.1 Overview Edition 04/2018
14
1.1.5 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. In the case of in-
correct usage,ASM Assembly Systems GmbH & Co. KG will not assume liability for any damage
which occurs and will not guarantee the correct and proper function of machine components.
Incorrect usage of the SIPLACE CA4 V2 includes:
– Operation of the SIPLACE Wafer System with safety equipment deactivated or removed.
– Operation of the SIPLACE Wafer System outside the SIPLACE CA4 V2.
– Pickup of components that do not meet the permitted specification.
– Use of wafer supports that have not been approved.
– Use of unauthorized accessories and additional modules.
– Use of the SIPLACE Wafer System by unqualified personnel.
– Unclear allocation of electrical connecting cables to each SIPLACE Wafer System and the
installed options.
– Persons accessing the SIPLACE Wafer System and protective covers.
1.1.6 Noise emissions
1
Max. noise emissions 75 dB (A)
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.1 Overview
15
1.1.7 Important notes on environmentally-friendly disposal of materials and com-
ponents
SIPLACE products are preferably manufactured using materials and parts that can be easily sep-
arated and disposed of in an environmentally-friendly way.
1
1.1.8 Electromagnetic compatibility (EMC)
The SIPLACE Wafer System is designed and tested for professional use in industrial applications.
Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.9 Note on original SIPLACE accessories
1
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.
1 Introduction User manual SIPLACE Wafer System (SWS)
1.2 Description of functions Edition 04/2018
16
1.2 Description of functions
1.2.1 SIPLACE Wafer System (SWS) function
The new SWS provides a fully automatic wafer and chip handling system. It is fully integrated into
a SIPLACE CA4 V2 location. Each location can (with restrictions) be fitted with an SWS or with
an X table.
The SWS functions like a feeder for the SIPLACE system and transports the dies from the wafer
to a single, fixed pickup position for the placement head. The placement head picks the die up
from the SWS and places this on the board as done during SMD handling.
The SWS appears in SIPLACE Pro like an X table with a special feeder type. The programming
of this is the same as that for the SIPLACE CA4 V2. Die handling is programmed at a separate
terminal on the SWS. The main parameters to be programmed are as follows:
– Magazine type
– Wafer frame type
– Wafer and die dimensions
– Die recognition
– Die ejection parameters
– Link to SIPLACE Pro