00198371-01_UM_SWS-EN.pdf - 第32页
1 Introduction User manual SIPLACE Wafer System (SWS) 1.5 Important notes on the user manual Edition 04/2018 32 1.5.4 Revision t able 1 1.5.5 Further information about and content s of the documentation p ackage 1.5.5.1 …
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.5 Important notes on the user manual
31
1.5 Important notes on the user manual
1.5.1 Contents and storage of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the SIPLACE Wafer System. The service engineers, qualified staff, operators and
users plus system owner must therefore read it before commencing installation and commission-
ing. The instructions must be kept permanently accessible where the SIPLACE Wafer System is
used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.5.2 Danger notes
1
1.5.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant
contract agreement concerning the supply of the machine described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for
faults or defects. The provisions of the contract regarding the liability for faults or defect are neither
extended nor restricted by any statements in this user manual.
WARNING
Read the user manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the SIPLACE Wafer System if you have precise knowledge
of the relevant section in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
1 Introduction User manual SIPLACE Wafer System (SWS)
1.5 Important notes on the user manual Edition 04/2018
32
1.5.4 Revision table
1
1.5.5 Further information about and contents of the documentation package
1.5.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
1.5.5.2 SIPLACE on the world wide web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at http://
www.asm-smt.com.
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
Manual Edition
First edition User manual 04/2018 EN
User manual SIPLACE Wafer System (SWS) 1 Introduction
Edition 04/2018 1.5 Important notes on the user manual
33
1.5.6 Abbreviations
1
CO Component
DCA Direct chip attach
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
FC Flip chip
GND Ground
PCB Printed circuit board
SMD Surface mounted device
SC Station computer
SWS SIPLACE Wafer System