00194845-0302_MM_D1_D2_EN.pdf - 第20页
3 Daily maintenance jobs SIPLA CE D1 / D2 02/2010 EN E dition 20 3
SIPLACE D1 / D2 3 Daily maintenance jobs
02/2010 EN Edition
19
3
You will need a waste bin, a collecting container and a vacuum cleaner for the daily cleaning jobs.3
3
Carry out the cleaning jobs in the order shown in the graphic to minimize down times. 3
3
: Press the Stop button at the first station if the gantry is over the placement position.
This will stop it outside your working area.
3
: Open the protective cover.
3
Empty the reject bin 3
a Remove the reject bin and empty it into the collecting container.
3
We recommend that you empty the reject bin every day, since this will show whether a certain
component is being rejected frequently. Use the track error menu, OIS or MaDaMaS (pick-up re-
liability) to determine the cause of the error. 3
3
s Clean around the reject bin with the vacuum cleaner and replace the bin.
3
The inside of the placement machine should be free of loose components since these can cause
faults if they get caught between moving parts. 3
3
3
Vacuum the nozzle changer 3
Keep the vacuum cleaner at least 1 cm away from the nozzles so as not to damage them. 3
3
3
d Clean the nozzle changers of the Collect&Place head with a vacuum cleaner.
3
The nozzle changers should be free of loose components since these could prevent nozzles being
picked up and set down correctly. 3
3
3 Daily maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
20
3
SIPLACE D1 / D2 3 Daily maintenance jobs
02/2010 EN Edition
21
Vacuum the feeder modules 3
3
Keep at least 1 cm away from the feeder module to avoid damaging the component covers. 3
3
a Carefully clean the feeder area with a vacuum cleaner. There should be no loose components
in the feeder area.
3
: Close the protective cover.
: Press the Start button.
3
Production can continue on the placement machine during the next steps. 3
3
3
Empty waste tape container 3
s Pull the waste tape container out of the component trolley.
d Empty it into the waste bin.
3
f Clean around the waste tape container with the vacuum cleaner, then push it back into the
component trolley.
3
3
: Repeat the "daily maintenance jobs" at every feeder area.
3
3
3
3
3
3
3
3