00194845-0302_MM_D1_D2_EN.pdf - 第25页
SIPLA CE D1 / D2 4 Weekly maintenance jobs 02/2010 EN Edition 25 Empty the component drawer or flap of the 8 mm S feeder 4 : Unplug the 8 mm S fee der and l ift it off the change over table. 4 a Remove l oose compon ents…
4 Weekly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
24
4
SIPLACE D1 / D2 4 Weekly maintenance jobs
02/2010 EN Edition
25
Empty the component drawer or flap of the 8 mm S feeder 4
: Unplug the 8 mm S feeder and lift it off the changeover table.
4
a Remove loose components from the changeover table with a brush or using the vacuum
cleaner.
4
s Empty the component drawer of the 2x8 mm S feeder (if present).
4
d Open the flap of the 3x8 mm S feeder (if present) and remove the components.
4
f Wipe the base of the feeder to remove any dirt.
4
g Cut off the used tape so that it is flush with the feeder.
4
: Return the feeder modules to their original (correct) locations.
4
Make sure that the feeder is seated firmly on the changeover table and is inserted at the right po-
sition. 4
4
4
4
: Close the protective cover.
: Repeat these tasks in every placement area.
4
4
4
4
5 Monthly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
26
5 Monthly maintenance jobs
5