00194845-0302_MM_D1_D2_EN.pdf - 第43页
SIPLA CE D1 / D2 6 2-monthly maintenance jobs 02/2010 EN Edition 43 Maintain the component feeder table 6 : Clear the fee der area. : Remove an y loose componen ts from the comp onent fe eder table usi ng the vacuu m cle…
6 2-monthly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
42
6
SIPLACE D1 / D2 6 2-monthly maintenance jobs
02/2010 EN Edition
43
Maintain the component feeder table 6
: Clear the feeder area.
: Remove any loose components from the component feeder table using the vacuum cleaner.
a Use a whetstone to remove any bumps on the magnetic rail.
6
6
s Preserve the feeder area using a lint-free cloth sprayed with WD40.
: Vacuum up any loose components from the tape container and remove any unwanted stickers
and adhesive tape.
6
d Cut off the excess used tape flush with the feeder and empty the component drawer or the
component flap on 8 mm S feeder modules.
: Return the feeder modules to the feeder area.
Make sure that each feeder is in the correct location and is connected correctly. 6
6
6
6
: Close the protective cover.
: Switch the placement machine on at the main switch.
7 4-monthly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
44
7 4-monthly maintenance jobs
7.1 Maintenance of the C&P 6 / 12 placement heads
Structure of the 12-segment Collect&Place head 7
7
Fig. 7.1 - 1 12-segment Collect&Place head, digital
(1) Vacuum generator
(2) Turning station, DP axis
(3) Star with 12 sleeves, DR axis
(4) Forced air valve
(5) Silencer
s
a
g
f
d