00194845-0302_MM_D1_D2_EN.pdf - 第80页
9 Maintain the sleeves SIPLA CE D1 / D2 02/2010 EN E dition 80 9
SIPLACE D1 / D2 9 Maintain the sleeves
02/2010 EN Edition
79
a Remove any dirt from the long vacuum hole by turning a 1.4 mm drill bit clockwise in the hole.
Turning the bit will remove the dirt from the hole.
s Remove the dirt from the transverse vacuum hole using the 1.1 mm drill bit.
9
Wear laboratory gloves to carry out this step. 9
9
9
d Check the suction plate for damage.
Replace it if it is damaged.
d Clean the sleeve suction plate using a dry, lint-free cloth.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9 Maintain the sleeves SIPLACE D1 / D2
02/2010 EN Edition
80
9
SIPLACE D1 / D2 9 Maintain the sleeves
02/2010 EN Edition
81
a Clean the edge of the sleeve using a lint-free cloth moistened with ethyl alcohol.
9
s Clean the incremental disc of the sleeve using a lint-free cloth moistened with ethyl alcohol.
9
d Clean the sleeve shaft using a lint-free cloth moistened with ethyl alcohol.
9
f Carefully clean the circumference of the ball catch with a lint-free cottonwool bud moistened
with ethyl alcohol.
9
9