00194845-0302_MM_D1_D2_EN.pdf - 第66页
8 Annual maintenance work SIPLA CE D1 / D2 02/2010 EN E dition 66 8
SIPLACE D1 / D2 8 Annual maintenance work
02/2010 EN Edition
65
Function test of used tape cutter 8
a Introduce a DIN A3 sheet or two DIN A4 sheets stuck together into the used tape channel.
8
One DIN A4 sheet on its own is too short to reach the tape cutter. 8
8
8
s Stick the sheet(s) firmly to the used tape channel using adhesive tape.
8
Make sure that no paper protrudes into the traveling range of the placement head. 8
8
8
d Log onto the station as a service engineer and start SITEST.
d Click on the "Component tables" button on the taskbar.
d In the view that appears, click on "Activate tape cutter".
8
: Remove the stuck-on sheet from the used tape channel.
Contact your Regional Service Center if it is not cut through cleanly.
8
8
8
8
8
8
8
8
8
8 Annual maintenance work SIPLACE D1 / D2
02/2010 EN Edition
66
8
SIPLACE D1 / D2 8 Annual maintenance work
02/2010 EN Edition
67
Greasing the Y-axis gantries 8
8
a Turn the grease gun counter-clockwise to open.
8
s Pull back the grease gun plunger.
It must lock into place.
8
d Fill the grease gun with ISOFLEX TOPAS NCA 52 grease.
8
: Turn the grease gun clockwise to close.
8
f Release the lock.
The spring force moves the plunger forward.
8
g Push back the ball on the vent screw to vent the grease gun.
8
: Press the trigger until the grease emerges.
The grease gun is now ready for use.
8
8
8
8
8
8
8
8
8
8
8