00194845-0302_MM_D1_D2_EN.pdf - 第77页

SIPLA CE D1 / D2 9 Maintain the sleeves 02/2010 EN Edition 77 9 Y ou will n eed the foll owing tool s and co nsumabl es for ma intaining the slee ves: 9 – Labor atory gloves – Ethyl alco hol – Lint-fr ee cloths – Cottonw…

100%1 / 86
9 Maintain the sleeves SIPLACE D1 / D2
02/2010 EN Edition
76
9 Maintain the sleeves
9
SIPLACE D1 / D2 9 Maintain the sleeves
02/2010 EN Edition
77
9
You will need the following tools and consumables for maintaining the sleeves: 9
– Laboratory gloves
– Ethyl alcohol
– Lint-free cloths
– Cottonwool buds
– Microtips (cottonwool buds)
– Drill bit, 1.1 mm
– Drill bit, 1.4 mm
– Fin Grease spray grease
– UNISILKON L250L
– Suction plate.
SIPLACE sleeve maintenance:
12-segment C&P head (item no. 00375681-01). 9
9
a Check the film for damage.
If the film is damaged, send the sleeve to SIPLACE Sleeve Maintenance.
9
s Spray a little Teflon grease into a suitable container.
Moisten the cottonwool bud with Teflon grease.
Do not spray the Teflon grease directly from the spray can to avoid over-application, and thus
damage to the placement head!
9
Only use ethyl alcohol for cleaning. Do not use surgical spirit otherwise smearing will occur on the
incremental disk. 9
Do not use silicone-soluble cleaning agents. 9
9
d Run the lightly moistened cottonwool bud along the link of the anti-rotation element.
9
f Check that the switching ring can be moved easily in the sleeve.
The unit that is moved must not catch or run jerkily.
If this is not the case after greasing, send the sleeve to SIPLACE Sleeve Maintenance.
9 Maintain the sleeves SIPLACE D1 / D2
02/2010 EN Edition
78
9