00194845-0302_MM_D1_D2_EN.pdf - 第21页
SIPLA CE D1 / D2 3 Daily maintenance jobs 02/2010 EN Edition 21 V acuum th e feeder modules 3 3 Keep at l east 1 cm away from th e feeder m odule to av oid dama ging the c omponent c overs. 3 3 a Carefull y clean the fee…
3 Daily maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
20
3
SIPLACE D1 / D2 3 Daily maintenance jobs
02/2010 EN Edition
21
Vacuum the feeder modules 3
3
Keep at least 1 cm away from the feeder module to avoid damaging the component covers. 3
3
a Carefully clean the feeder area with a vacuum cleaner. There should be no loose components
in the feeder area.
3
: Close the protective cover.
: Press the Start button.
3
Production can continue on the placement machine during the next steps. 3
3
3
Empty waste tape container 3
s Pull the waste tape container out of the component trolley.
d Empty it into the waste bin.
3
f Clean around the waste tape container with the vacuum cleaner, then push it back into the
component trolley.
3
3
: Repeat the "daily maintenance jobs" at every feeder area.
3
3
3
3
3
3
3
3
4 Weekly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
22
4 Weekly maintenance jobs
4