00194845-0302_MM_D1_D2_EN.pdf - 第29页

SIPLA CE D1 / D2 5 Monthly maintenance jobs 02/2010 EN Edition 29 a Remove th e valve plu ngers. When you pull out the va lve plunger , be car eful not to touch th e small b oards. Th e valve plu ngers are con ductive an…

5 Monthly maintenance jobs SIPLACE D1 / D2

02/2010 EN Edition

SIPLACE D1 / D2 5 Monthly maintenance jobs

02/2010 EN Edition

a Remove the valve plungers.

When you pull out the valve plunger, be careful not to touch the small boards. The valve plungers

are conductive and could cause a short-circuit. 5

s Clean the valve casing using a cottonwool bud moistened with ethyl alcohol.

: Insert the cleaned and very lightly greased valve plungers into the valve casing.

See section ("Maintain the valve plungers").

: Move them back and forward several times.

: If the valve plungers move very easily, replace them with new plungers.

If the valve plungers move too easily, they cannot be guaranteed to work correctly. 5

d Clean the segment using a cottonwool bud moistened with ethyl alcohol.

Never use pipe-cleaners or bottle brushes to clean the segment.

This could tear out the sleeve retaining springs or leave lint or hairs in the segment which, in turn,

could cause faults. 5

: Insert the cleaned sleeves into the segments.

See section ("Maintain

the sleeves").

Use a very gentle pressure to engage the sleeves to avoid damaging the retaining springs. 5

: Use the "Single Functions" menu to pick up the nozzles of the Collect&Place head.

5 Monthly maintenance jobs SIPLACE D1 / D2

02/2010 EN Edition