00194845-0302_MM_D1_D2_EN.pdf - 第54页
7 4-monthly maintenance jobs SIPLA CE D1 / D2 02/2010 EN E dition 54 7
SIPLACE D1 / D2 7 4-monthly maintenance jobs
02/2010 EN Edition
53
Vacuum distributor (back part of head) 7
a Carefully remove the vacuum distributor together with the two O-rings.
7
s Carefully remove the two O-rings.
: Clean them and grease them very sparingly with UNISILKON L250L.
: Check the vacuum distributor for damage.
Replace the distributor if it is damaged (see servicing instructions).
7
: Wipe the vacuum distributor using a lint-free cloth moistened with ethyl alcohol.
7
The front part of the vacuum distributor (the side without a ball catch) can also be softened in ethyl
alcohol. 7
7
: Blow through with compressed air.
7
d Check that the ball catch moves easily.
If it is stiff, replace the complete vacuum distributor.
f Place the clean vacuum distributor and the lightly greased O-rings on a clean surface.
7
7
7
7
7
7
7
7
7
7
7 4-monthly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
54
7
SIPLACE D1 / D2 7 4-monthly maintenance jobs
02/2010 EN Edition
55
Star brake 7
: Check the star brake for damage and to ensure that it is working correctly.
7
a Wipe the star brake using a dry, lint-free cloth. Make sure that you remove all grease residues.
: Fill each of the three small holes in the star brake with ISOFLEX TOPAS NCA 52.
s Remove excess grease with a lint-free cloth.
7
: Apply a thin film of grease to the surface of the star brake.
7
Vacuum distributor seat 7
d Clean the vacuum distributor seat with a cottonwool bud moistened with ethyl alcohol.
7
Be careful not to push dirt into the vacuum openings with the cottonwool bud. 7
7
7
7
7
7
7
7
7
7
7