00194845-0302_MM_D1_D2_EN.pdf - 第36页
6 2-monthly maintenance jobs SIPLA CE D1 / D2 02/2010 EN E dition 36 6
SIPLACE D1 / D2 6 2-monthly maintenance jobs
02/2010 EN Edition
35
6
You will need the following tools, equipment and consumables for the 2-monthly maintenance: 6
– Vacuum cleaner
– Condensate catch tray
– Short-bristled brush
– Phillips screwdriver
– Whetstone
–Scissors
– Lint-free cloths
– ISOFLEX TOPAS NCA52 grease
–WD40
– Filter insert, 5 microm. for series 112, if required
– New silencer for the Collect&Place head DLM2, if required.
6
6
Inspect or replace the filter cartridge 6
a Open the door to the compressed air supply.
6
s Turn the main compressed air valve clockwise into the horizontal position to close it.
: As soon as both manometers read 0, switch the placement machine off at the main switch.
6
d Remove the cover flap by pulling the yellow cap release down and turning the cover flap coun-
ter-clockwise (bayonet fitting).
6
6
6
6 2-monthly maintenance jobs SIPLACE D1 / D2
02/2010 EN Edition
36
6
SIPLACE D1 / D2 6 2-monthly maintenance jobs
02/2010 EN Edition
37
: Place a catch tray beneath the compressed air maintenance unit.
a Press the drain nozzle on the condensate tank to release the pressure and to drain den con-
densate.
6
s Remove the condensate tank by turning it counter-clockwise and then pulling it down and out
(bayonet fitting).
d Unscrew the filter casing from the compressed air maintenance unit.
: Replace the filter if it is dirty.
: Reverse the sequence described above to refit the filter and filter casing.
6
: Open the main compressed air valve once more.
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6