00198377-01_SM_JTF-ML2_en.pdf - 第114页

4 Conveyor Mechanics 4.8 Replacing the Toothed Belt 114 Service Manual SIPLACE JTF-ML2 08/2017 ► Remove the screw ISO 4762 - M 3 x 6-A2-70 [03042541-xx] (1) while holding the conveyor shaft (3) with a open ended wrench. …

4 Conveyor Mechanics

4.8 Replacing the Toothed Belt

Service Manual SIPLACE JTF-ML2 08/2017 113

NOTICE

Torn heat transfer sheet

Take care not to tear the heat transfer interface sheet

► Remove the two screws ISO 10642 - M3x6-

A2-70 [03082814-xx] (1).

► Remove the Conveyor top cover

[03147570-xx] (2).

► Remove the two screws ISO 10642 - M3x6-

A2-70 [03082814-xx] (4).

► Remove the Stopper plate [03132873-xx] (3).

► Loosen the adjustment pulley (2), before remov-

ing the toothed belt 10+0.1 S2M/726

[03130743-XX] (1).

4 Conveyor Mechanics

4.8 Replacing the Toothed Belt

114 Service Manual SIPLACE JTF-ML2 08/2017

► Remove the screw ISO 4762 - M 3 x 6-A2-70

[03042541-xx] (1) while holding the conveyor

shaft (3) with a open ended wrench.

► Remove the Driving pulley S2MZ26 [03128931-

xx] (2).

► Remove the four screws [ISO 10642 - M3x6-

A2-70 [03082814–xx] (1).

► Remove the Belt support [03133050-xx] (2).

4 Conveyor Mechanics

4.8 Replacing the Toothed Belt

Service Manual SIPLACE JTF-ML2 08/2017 115

► Remove the two screws ISO 4762 - M 3 x 12-

A2-70 [03042544-xx].

► Loosen the two screws of the Single Disk flexible

Coupling 4x4 [03146598-xx].

► Carefully draw the Conveyor driver unit

[03132255-xx] (1) from the conveyor.