00198377-01_SM_JTF-ML2_en.pdf - 第30页
2 General Tasks 2.1 Hardware Tasks 30 Service Manual SIPLACE JTF-ML2 08/2017 Fig.14: Mounting the Transport 2 ► Push the plate (1) until end position to the left. Fig.15: Mounting the Transport 3 ► Put back the plate …
2 General Tasks
2.1 Hardware Tasks
Service Manual SIPLACE JTF-ML2 08/2017 29
► Move the tower a bit while mounting the screws
to reduce pressure on the screws.
Fig.12: Tighten the tower
► Fasten the tower with two screws(1) ISO7379 -
10x25-12.9 on the SIPLACE JTF‑ML2 adapter.
2.1.6 Mounting the Conveyor
Parts, Equipment and Tools
●
Standard tools
Installation
Fig.13: Mounting the Transport 1
► Remove the screws(1) and remove the
cover(2).
2 General Tasks
2.1 Hardware Tasks
30 Service Manual SIPLACE JTF-ML2 08/2017
Fig.14: Mounting the Transport 2
► Push the plate(1) until end position to the left.
Fig.15:
Mounting the Transport 3
► Put back the plate with the screws.
Fig.16: Mounting the Transport 4
► Loosen the screw(2) at conveyor pivot(1).
► (3) Push the conveyor pivot until end position to-
wards the tower.
2 General Tasks
2.1 Hardware Tasks
Service Manual SIPLACE JTF-ML2 08/2017 31
Fig.17: Mounting the Transport 5
► (1) Insert the conveyor. Make sure that it fits cor-
rectly into the conveyor pivot.
► (2) Swing the transport down onto the SIPLACE
JTF-ML2 adapter.
Fig.18: Mounting the Transport 6
► Fasten the transport with two screws(1)
(ISO7379 - 8x16-12.9) on the SIPLACE JTF-
ML2 adapter.