00198377-01_SM_JTF-ML2_en.pdf - 第121页

5 Electrics 5.1 Replacing the Slot Sensor Service Manual SIPLACE JTF-ML2 08/2017 121 5 Electrics 5.1 Replacing the Slot Sensor Parts, Equipment and Tools ● Standard tools ● Slot Sensor with connector [03145975-xx] Remova…

4 Conveyor Mechanics

4.8 Replacing the Toothed Belt

120 Service Manual SIPLACE JTF-ML2 08/2017

Installation

► Follow the removal instructions in reverse order for installation. Also observe the following in-

structions:

► Check the flatten space (1) when putting back to-

gether.

5 Electrics

5.1 Replacing the Slot Sensor

Service Manual SIPLACE JTF-ML2 08/2017 121

5 Electrics

5.1 Replacing the Slot Sensor

Parts, Equipment and Tools

●

Standard tools

●

Slot Sensor with connector [03145975-xx]

Removal

► Switch off the machine, disconnect it from the power supply and secure it to prevent

unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].

► Remove the conveyor from the machine (see 2.1.1 "Removing Conveyor from Ma-

chine" [}17]).

► Remove the Conveyor driver unit from the conveyor (see 4.2 "Removing the Conveyor Driver

Unit and its Parts as Preparatory Steps" [}72]).

► Make sure you have removed the connector (1).

5 Electrics

5.1 Replacing the Slot Sensor

122 Service Manual SIPLACE JTF-ML2 08/2017

► Remove the two screws DIN EN ISO 7380-M3 x

5-A2-70 [03045193-xx] (2).

► Remove the Clamper cover [03145970-xx] (1).

► Turn the Clamper gear 0.5x40 (2) to move the

clamper sensor part [03143529-xx] till the screws

(1) of the Slot sensor w/ connector [03145975-xx]

are reachable.

► Remove the two screws ISO 4762 - M 3 x 6-

A2-70 [03042541-xx] (1).

► Remove the Slot sensor w/ connector [03145975-

xx].

Installation

► Follow the removal instructions in reverse order for installation.