00198377-01_SM_JTF-ML2_en.pdf - 第125页

5 Electrics 5.3 Replacing the HMI LED Cable Service Manual SIPLACE JTF-ML2 08/2017 125 5.3 Replacing the HMI LED Cable Parts, Equipment and Tools ● Standard tools ● Cable, HMI LED assembly [03146655-xx] Removal ► Switch …

5 Electrics

5.2 Replacing the Beam Sensor Emitter Cable

124 Service Manual SIPLACE JTF-ML2 08/2017

► Remove the two screws ISO 7045 - M2 x 4-

A2-50-H [03010197-xx] (2).

► Remove the Cable, through beam sensor emitter,

common [03146662-xx] (1).

Installation

► Follow the removal instructions in reverse order for installation.

NOTICE

Tray Position

Do a running sensor check when the replacement is completed to ensure the correct tray

position is achieved.

5 Electrics

5.3 Replacing the HMI LED Cable

Service Manual SIPLACE JTF-ML2 08/2017 125

5.3 Replacing the HMI LED Cable

Parts, Equipment and Tools

●

Standard tools

●

Cable, HMI LED assembly [03146655-xx]

Removal

► Switch off the machine, disconnect it from the power supply and secure it to prevent

unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].

► Remove the Tower from the machine (see 2.1.2 "Removing Tower from Machine" [}21]).

► Remove the top cover (see 2.1.3 "Removing Tower Top Cover" [}25]).

► Disconnect the plug X1.H1 (2) of the Cable, HMI

LED assembly [03146655-xx] (1).

5 Electrics

5.3 Replacing the HMI LED Cable

126 Service Manual SIPLACE JTF-ML2 08/2017

► Push the Cable, HMI LED assembly [03146655-

xx] through the hole to the outside of the tower.

Installation

► Follow the removal instructions in reverse order for installation.