00198377-01_SM_JTF-ML2_en.pdf - 第124页

5 Electrics 5.2 Replacing the Beam Sensor Emitter Cable 124 Service Manual SIPLACE JTF-ML2 08/2017 ► Remove the two screws ISO 7045 - M2 x 4- A2-50-H [03010197-xx] (2) . ► Remove the Cable, through beam sensor emitter, c…

100%1 / 150
5 Electrics
5.2 Replacing the Beam Sensor Emitter Cable
Service Manual SIPLACE JTF-ML2 08/2017 123
5.2 Replacing the Beam Sensor Emitter Cable
Parts, Equipment and Tools
●
Standard tools
●
Cable, through beam sensor emitter, common [03146662-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the tower from the machine (see 2.1.2 "Removing Tower from Machine" [}21]).
► Remove the top cover (see 2.1.3 "Removing Tower Top Cover" [}25]).
► Remove the side cover (see 2.1.4 "Removing Side Cover" [}27]).
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1) of the cable clamp.
► Disconnect the plug X*(1) of the Cable, through
beam sensor emitter, common [03146662-xx].
5 Electrics
5.2 Replacing the Beam Sensor Emitter Cable
124 Service Manual SIPLACE JTF-ML2 08/2017
► Remove the two screws ISO 7045 - M2 x 4-
A2-50-H [03010197-xx] (2).
► Remove the Cable, through beam sensor emitter,
common [03146662-xx] (1).
Installation
► Follow the removal instructions in reverse order for installation.
NOTICE
Tray Position
Do a running sensor check when the replacement is completed to ensure the correct tray
position is achieved.
5 Electrics
5.3 Replacing the HMI LED Cable
Service Manual SIPLACE JTF-ML2 08/2017 125
5.3 Replacing the HMI LED Cable
Parts, Equipment and Tools
●
Standard tools
●
Cable, HMI LED assembly [03146655-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the Tower from the machine (see 2.1.2 "Removing Tower from Machine" [}21]).
► Remove the top cover (see 2.1.3 "Removing Tower Top Cover" [}25]).
► Disconnect the plug X1.H1 (2) of the Cable, HMI
LED assembly [03146655-xx] (1).