00198377-01_SM_JTF-ML2_en.pdf - 第99页
4 Conveyor Mechanics 4.7 Replacing the Pusher Unit and Parts Service Manual SIPLACE JTF-ML2 08/2017 99 Belt presser [03146231-xx] removed. ► Loosen the two screws ISO 4762 - M 3 x 6-A2-70 [03042541-xx] (1) on the Pusher …
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
98 Service Manual SIPLACE JTF-ML2 08/2017
► Remove the two screws DIN EN ISO 7380-M3 x
5-A2-70 [03045193-xx] (1).
► Remove the two screws ISO 4762 - M 3 x 6-
A2-70 [03042541-xx] (1).
► Remove the Pusher guide [03145802-xx] (1).
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1).
► Remove the Belt presser [03146231-xx] (2).
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
Service Manual SIPLACE JTF-ML2 08/2017 99
Belt presser [03146231-xx] removed.
► Loosen the two screws ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1) on the Pusher 22 motor mount-
ing [03147369-xx] to release tension on the
Toothed belt Synchroflex 6+-0.1 S3M/459
[03146204-xx].
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
100 Service Manual SIPLACE JTF-ML2 08/2017
► Remove the Toothed belt Synchroflex 6+-0.1
S3M/459 [03146204-xx].
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following in-
structions:
► Check the belt tension with a belt tension meas-
uring device while adjusting the two screws ISO
4762 - M 3 x 6-A2-70 [03042541-xx] (1) on the
Pusher 22 motor mounting [03147369-xx]. The
belt tension should be 55±5 HZ.