00198377-01_SM_JTF-ML2_en.pdf - 第134页

5 Electrics 5.8 Replacing the Reflective Sensor Cable 134 Service Manual SIPLACE JTF-ML2 08/2017 ► Remove all the cables necessary. ► Remove the five screws ISO 7380-2 M 3 x 6- A2-70 [03099571-xx] (1) . ► Remove the two …

100%1 / 150
5 Electrics
5.8 Replacing the Reflective Sensor Cable
Service Manual SIPLACE JTF-ML2 08/2017 133
► Remove the PCBA, Tesla control board
[03125534-xx].
Installation
► Follow the removal instructions in reverse order for installation.
5.8 Replacing the Reflective Sensor Cable
Parts, Equipment and Tools
●
Standard tools
●
Cable, reflective sensor, common [03146661-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the conveyor from the machine (see 2.1.1 "Removing Conveyor from Ma-
chine" [}17]).
► Remove the four screws DIN EN ISO 7380-M3 x
5-A2-70 [03045193-xx] (1).
► Remove the Conveyor motor cover [03145679-
xx] (2).
5 Electrics
5.8 Replacing the Reflective Sensor Cable
134 Service Manual SIPLACE JTF-ML2 08/2017
► Remove all the cables necessary.
► Remove the five screws ISO 7380-2 M 3 x 6-
A2-70 [03099571-xx] (1).
► Remove the two screws ISO 7045 - M2 x 4-
A2-50-H [03010197-xx] on the Cable, reflective
sensor, common [03146661-xx].
► Remove the Cable, reflective sensor, common
[03146661-xx].
Installation
► Follow the removal instructions in reverse order for installation.
5 Electrics
5.9 Replacing the PCBA Conveyor Drive Board
Service Manual SIPLACE JTF-ML2 08/2017 135
5.9 Replacing the PCBA Conveyor Drive Board
Parts, Equipment and Tools
●
Standard tools
●
PCBA, conveyor drive board [03128812-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the conveyor from the machine (see 2.1.1 "Removing Conveyor from Ma-
chine" [}17]).
► Remove the four screws DIN EN ISO 7380-M3 x
5-A2-70 [03045193-xx].
► Remove the PCB cover [03128922-xx]
► Remove all cables from the PCBA, conveyor
drive board [03128812-xx].