iTAC Advance Issue 2, Mar 2018.pdf - 第28页
28 Issue 2 , Mar 18 ❑ Confirm either by Create (to be released later) or Creating and releasing button. If WO is created the state is If WO is created and released the state is
27
Issue 2, Mar 18
❑ Select required product and confirm by OK.
❑ In “create work order” window fill in/select following minimal information in yellow fields which
are mandatory.
Cust. Order. No. (Define Name)
Order Quantity: Number of planned products
Product Version: Select required product and its BOM version
WP Version: Select required work plan ans its version.
Other fields are optional.
28
Issue 2, Mar 18
❑ Confirm either by Create (to be released later) or Creating and releasing button.
If WO is created the state is
If WO is created and released the state is
29
Issue 2, Mar 18
The state can be changed - right click and select “change state to”.
The WO will change state to as soon as will be activated.
NOTES:
Equipment
❑ Go to ADM\Master Data\Equipment
To list all available equipment type asterisk ("*") in equipment no. field, then click on load data.
Objective HO 7: Create new Equipment
Note: iTAC expert have to define the specific name for each equipment type (stencil,
squeegee, etc.) This name is to be used either as Equipment Description or as Part Number.
This name has to be defined in E:\Config\PluginData\iTAC7\ItacVerificationItems.xml. Item
Name equals to DEK “standard” name (in verification page), Value equals to the specific name
for each type of equipment defined in iTAC (either as Equipment Description or as Part
Number). See the snapshots below