iTAC Advance Issue 2, Mar 2018.pdf - 第38页

38 Issue 2 , Mar 18 Comment : Written description of parameter ( e.g. Program_Top/Bot, MES Switch) Type : Could be used any ty pe, usually is used Config Measurement type : Text Nominal : Name of the program on the print…

Issue 2, Mar 18

❑ In Create recipe parameter window fill in following fields:

Descripton: Identificator of recipe parameter. Default setting is PP_B (Bottom side), PP_T (Top

side), MES (MES Key). Description may differ customer to customer. If the setting is different then

same parameters have to be corrected in “iTACmdaConfiguration” file in E:\Config\PluginData\iTAC7

folder.

See example:

Issue 2, Mar 18

Comment: Written description of parameter ( e.g. Program_Top/Bot, MES Switch)

Type: Could be used any type, usually is used Config

Measurement type: Text

Nominal: Name of the program on the printer or MES Key parameter (default = ON for enabling OFF

for disabling). Mes Key may differ and can be changed in “iTACmdaConfiguration” int the same way

as shown above.

Once all 3 parameters are created confirm by OK.

Created recipe will appear in “items” window. Click on MDA items tab.

Select recipe, right click and select release. The state will change to green.

Issue 2, Mar 18

Finally the recipe has to be activated - right click and select activate.Then confirm by activate button

in recipe editor.

Once recipe is activated a tick will be visible in activate field.