iTAC Advance Issue 2, Mar 2018.pdf - 第74页

74 Issue 2 , Mar 18 31 Open cover and scan re quired equipment equipment verif ication should not b e possible due to dif ferent equipm ent description 32 Kill DEK software. Edit values in "ItacVerificationItem s.xm…

Issue 2, Mar 18

Open cover, un-verify rear

squeegee. In Setup

Product\Option\Verification disable

Squeegee Blade Rear. Scan

(PASS) PCB on upline conveyor.

PCB should be rejected by machine

due to un-rigged rear squeegee on

the iTAC

Enable Squeegee Blade Rear in

Verification page and rescan.

Scan (PASS) PCB on upline

conveyor.

PCB should be accepted by

machine

Use mlChangeMaterialBinData

and change quantity to 1 on used

paste container.

2nd PCB should be rejected by

machine due to 0 quantity

Scan new paste container with

expired date.

Material should remain unverified -

red cross

check in iTAC if paste container is

rigged

Paste container should not be

rigged

In iTAC extend expiry date for

current paste container and rescan

material should be verified - green

tick

re-check in iTAC if paste container

is rigged

Paste container should be rigged

Load another product on printer

all equipment and material should

be unverified (red cross)

Check iTAC server on TR \ MIS -

Work order \ Order for the Paste

Printer line

all material and equipment should

be deleted from the line and

unrigged from WO

Open cover and scan required

equipment & material

All equipment and material should

be verified (green tick)

Check iTAC server on TR \ MIS -

Work order \ Order for the Paste

Printer line

scanned material should be setup

on the line and scanned equipment

rigged on the WO

Scan (PASS) PCB on upline

conveyor

PCB should be rejected by machine

due to different product name in

recipe

Open cover and scan all

equipment & material.Disable

iTAC Product Verification in iTAC

plugin. Scan (PASS) PCB on

upline conveyor

PCB should be accepted by

machine

Enable iTAC Product Verification

in iTAC plugin. Load correct

product on Printer. Re-scan

required equipment & material.

Scan (PASS) PCB on upline

conveyor

PCB should be accepted by

machine

Activate another recipe (with

different product name) for current

product. Scan (PASS) PCB on

upline conveyor

PCB should be rejected by machine

due to different product name in

recipe

Activate original recipe. Create

new Work plan for current product

and assign new equipment with

different equipment description.

Create new WO and assign new

work plan. Activate new WO on

line

No reaction on the printer

Issue 2, Mar 18

Open cover and scan required

equipment

equipment verification should not be

possible due to different equipment

description

Kill DEK software. Edit values in

"ItacVerificationItems.xml" file

according to equipment

description of new equipment used

on activated WO. Start DEK

software, initialize machine, open

cover and scan required

equipment and material.

All equipment and material should

be verified (green tick)

Check iTAC server on TR \ MIS -

Work order \ Order

scanned material should be setup

on the line and scanned equipment

rigged on the WO

Activate setup of current WO

WO should be activated

Scan (PASS) PCB on upline

conveyor

PCB should be accepted by

machine

Set incorrect 1st character and

number of characters for print

medium in Maintenance\Machine

Setup\Barcodes. Open cover and

scan material

material verification should not be

possible due to wrong barcode

Disable print medium in Setup

Product\Option\Verification

no reaction on the printer

Activate recipe on iTAC with MES

key set to "OFF"

no reaction on the printer

Place PCB with no barcode on

upline conveyor

PCB should be accepted by

machine due to MES OFF in recipe

Activate previous recipe on iTAC

with MES key se to "ON"

no reaction on the printer

Change material barcode setting

back to original. Enable print

medium in Setup

Product\Option\Verification. Open

cover and scan material

All equipment and material should

be verified (green tick)

Scan (PASS) PCB on upline

conveyor

PCB should be accepted by

machine

Deactivate WO from iTAC, Scan

(PASS) PCB on upline conveyor

PCB should be rejected by machine

NOTES:

Issue 2, Mar 18

Glossary

ADM

ADMinistration module - The ADM Module is used to maintain

all master data such as machines/components/work

plans/equipment, etc.

API

Application Programming Interface module - API module is

basically the list of various functions (calls) which are used as

communication interface between machine (e.g. printer,

placement machine, etc.) and other software.

Assigned Serial

numbers

Are the barcodes for specific PCBs/panels assigned to the

specific work step - station. It can be found in TR\MIS - Work

orders\Order. Double click on blue icon of Order no. for

specific station, e.g. printer. Click on serial no. tab.

BOM

Bill Of Material module - is used for creating & editing of

BOMs.

Component side

Older terminology used by iTAC for PCB layer (usually Top

side/ 2

side).

Container number

Regarding paste printer it is the barcode on each individual

paste pot/cartridge/cassette, etc. It should contain unique

number.

Equipment

Equipment is each specific consumable which is necessary

for manufacturing of selected product on particular station (on

printer it is e.g. screen, squeegee, tooling, etc.).

ERP

Enterprise resource planning

Fail

Is the status of the PCB or panel inside of PCB (multipanel

PCB). The production failed, but panel can be repaired.

Material

Material is each physical part included in BOM. This means

final product contains this part which is used during

manufacturing process (on the printer it is only print material).

MDA

Manufacturing Data Administration module - We use this

module for administration of recipes only.

MES

Manufacturing Execution System

MES Switch

Is the recipe characteristic which determines whether the

MES is used or not. By default the MEASURE_NAME=MES

and NOMINAL=OFF

Material & Logistic module - maps material flow and logistics

for production lines – from receiving to finished goods

inventory. For DEK only print material is maintained in this

module. In this module can be found if the paste is rigged or

not.

Pass

Is the status of the PCB or panel inside of PCB (multipanel

PCB). The production passed and can be processed by next

work step

PCB

Printed Circuit Board

Recipe

The recipe is important for product name check – contains

program name for Top & Bottom side. Also contains MES

switch. MES switch determines whether station is using MES

or not.

Rigged material or

equipment

Material or equipment was verified and accepted by iTAC. If

any used material or equipment is not rigged the production

cannot start.