iTAC Advance Issue 2, Mar 2018.pdf - 第5页

5 Issue 2 , Mar 18 COURSE AIMS and GOALS Upon completion of iTAC adv ance training program you will be able to: ❑ Use main functions and modules of MES Suite ❑ Understand Machine Assets module ❑ Understand Bill of Materi…

Issue 2, Mar 18

HO 19

Carry out all the steps in DEK Test Scenario

and record the result

PLEASE PRINT THIS DOCUMENT FOR USE AS A WORKBOOK

Objectives:

SS: Self Study required by the engineer prior to the hands on practical, which

is overviewed by a trainer or mentor. Reference material for this is via the

Technical Reference manual, knowledge base articles, sales toolkit and

details within this document.

HO: Hands On experience supervised by a trainer or mentor, preferably

performed in a training room facility. If it must be performed on a machine

outside of the training facility the Pre Course Machine Condition should be

benchmarked.

Launch and watch the Video.

Hands on Practical with Trainer / Mentor.

Refer to Reference Materials.

Issue 2, Mar 18

COURSE AIMS and GOALS

Upon completion of iTAC advance training program you will be able to:

❑ Use main functions and modules of MES Suite

❑ Understand Machine Assets module

❑ Understand Bill of Material module

❑ Create Work plan and assign the equipment

❑ Create Work Order

❑ Activate Work Order

❑ Administer Equipment

❑ Create Recipe

❑ Administer Material

❑ Understand various setting of iTAC plugin and know its limitation

❑ Use API Module

❑ Test iTAC with DEK machine

❑ Discuss technical details with customer, support sales and escalation

❑ Analyse the log files and describe the exact issue

NOTES:

Issue 2, Mar 18

Objective HO 1: Locate the hazardous areas of the machine / option.

Personal Safety

Watch the video and tick each safety item as it is demonstrated to you by

your instructor:

❑ Board clamps are sharp

❑ Wear eye protection and gloves when working with solder paste and

solvents

❑ If in doubt press the E-stop

❑ Do not bypass camsafe switches

Warning

▪ Moving machine parts can cause injury.

▪ During this course the machine may be operated with covers removed.

▪ Always remove system power prior to undertaking any work on machine.

▪ Ensure you DO NOT push or press any buttons or operate the machine until all

personnel are clear of danger

Strong Magnet warning (Machines with Linear Motors only)

▪ The linear motors inside the machine contain strong

permanent magnets. These

may interfere with pacemakers and metallic implants.

▪ These magnets could potentially erase data on credit cards, ID cards etc.

ESD hazard

▪ The printer contains Electro-Static Sensitive Devices (ESD).

▪ Do not touch any electronic component of PCB unless wearing a

correctly grounded wrist strap

Safety objective

I have been briefed on the above safety aspects and I am fully satisfied with my

responsibilities.

Sign:

Date: