SIPLACE Line Computer UNIX.pdf - 第381页
User Manual Line Computer UNIX 12 Production Tools / Station and Li ne Conf iguration Software Version 502.xx 10/2000 Issue 12.2 Line E ditor 379 I t I I 12.2.3 Cluster Configuration Station s of the same mac hine type (…
12 Production Tools / Station and Line Configuration User Manual Line Computer UNIX
12.2 Line Editor Software Version 502.xx 10/2000 Issue
378
I
t I I
Fig. 12.2.2 "Subline configuration" Window
To add a station to the current subline:
● Click on the name entry of the desired station.
The selected entry darkens. The station is added to the subline.
Deleting a station from the current subline:
● Click on the darkened name entry of the desired station using the right mouse button.
The entry is no longer highlighted in dark. The station is deleted from the subline.
If the highlighted name entry is clicked on with the left mouse button
, all other assigned stations
are removed from the subline as well.
Saving the configuration and integrating the current subline into the overall line:
● On the menu bar select the File --> Save function.
The configuration of the subline is saved.
The subline is accepted as part of the overall line.
NOTE
If all stations were removed from a subline already contained in the overall line, such subline no lon-
ger exists in the overall line following the save.
● On the menu bar select the File --> Exit function.
The "Subline configuration“ window closes.
Menu bar
View area
(stations have not been configured in the subline yet).
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 502.xx 10/2000 Issue 12.2 Line Editor
379
I
t I I
12.2.3 Cluster Configuration
Stations of the same machine type (e.g. S20 and S23) within a subline may be combined into clusters. These
are defined by cluster limits. A cluster is made up of all stations up to the first cluster limit in a subline or of the
stations between two cluster limits in a subline.
- A cluster may comprise the station types HS50 or 80S15/S20/S23 or 80F/F4/F5 or G2 (adhesive station).
- The configuration and setup of the stations within a cluster must be identical.
- On each station within a cluster, the same component share (’placement content’) of a given PCB will be
placed.
- The PCBs are assembled by a single station within a cluster. This station is not determined by the line
computer, but by "lift units" located between the stations of a cluster.
- Assembled PCBs are transported to the next cluster by an additional conveyor integrated into the station
concerned.
NOTES
The "Whispering down the Line" feature is not supported within the configured clusters and therefore needs
to be deactivated in the Machine Options Editor (see section 12.1.3).
Moreover, the jobs must always be scheduled by specifying lot type "U" (Infinite) in Job Control (see chapt.
14, section 14.2.3.7.
● On the menu bar on the desktop click on SERVICES --> Line configuration.
The
"Line configuration" selection window opens.
● Click on the Cluster configuration button.
The FSB containing the "Stammdaten: Anlagen" directory opens.
● Select the desired overall line "xx.ak" by double-clicking.
All sublines contained in the overall line are now displayed in the FSB.
12 Production Tools / Station and Line Configuration User Manual Line Computer UNIX
12.2 Line Editor Software Version 502.xx 10/2000 Issue
380
I
t I I
● Select subline "xx.va" and confirm by clicking on OK (or select subline directly by double-clicking on
its entry). The "Cluster configuration" window opens (see
Fig. 12.2.3).
All names of the stations configured in the subline are listed in the display area.
If clusters were already defined, the cluster limits are represented as broken lines in the list.
Fig. 12.2.3 "Cluster Configuration" Window
Defining one or more cluster limits:
● Select the name entry of the desired station by double-clicking on it.
The marking of the cluster limit is displayed below the name entry of the selected station.
● Repeat the procedure, if required.
NOTES
If only one cluster limit within the subline is created, the cluster will start with the first station of the
subline and ends with the station after which the cluster limit was defined.
If the last stations of the subline are to form a cluster, a cluster limit must be created to define the start
of the cluster and after the last station to define the end of the cluster.
Removing one or more cluster limits:
● Select the name entry of a station after which a cluster limit was defined by double-clicking on it.
The marking of the cluster limit is no longer displayed.
● Repeat the procedure, if required.
Menu bar
Stations within the cluster
Display area