SIPLACE Line Computer UNIX.pdf - 第405页

User Manual Line Computer UNIX 13 Production Tools / Set-Up Software Vers ion 502.xx 10/2000 Issue 13.1 Set-Up E ditor (Feeder Part and WPC/MTC Editors) 403 I t I I - Pick-up ang. [degr] Pick-u p ang le (rotatio nal an g…

100%1 / 600
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors) Software Version 502.xx 10/2000 Issue
402
I
t I I
- X [mm]
Correction of the pick-up position in X-direction: offset from the component center to the feeder divi-
sion center (default value: 0.000, corresponds to the feeder division center). See Fig. 13.1.11.
- Y [mm]
Correction of the pick-up position in Y-direction: offset from the component center to the feeder divi-
sion center in Y-direction (default value: 0.000, corresponds to the feeder division center).
See Fig. 13.1.11.
Fig. 13.1.11 Correction of the Pick-Up Position in X-Direction and Y-Direction
- Z [mm]
Correction of the pick-up position in Z-direction: modified pick-up height of the component from the
feeder division (default value: 0.000, corresponds to the center of the feeder division).
See Fig. 13.1.12.
Fig. 13.1.12 Correction of the Pick-Up Position in Z-Direction
X [mm]
Y [mm]
component
center
tape pocket
component
feeder
division cente
r
nozzle
component
z [mm]
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 502.xx 10/2000 Issue 13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors)
403
I
t I I
- Pick-up ang. [degr]
Pick-up angle (rotational angle) of the component in the feeder division (default value: 0.00).
See Fig. 13.1.13. Only the following angles may be used: 0°, 90°, 180°, 270°.
Fig. 13.1.13 Pick-Up Angle of the Component in the Feeder Division
- Vibrat. time [ms]
Vibration time (= time required for supplying the next component) of the selected feeder type.
(default value: minimum value in ms)
NOTE
If offset values were entered that are not possible for the selected feeder type, the respective editing
fields are surrounded by a red frame. Moreover, for the vibration time an error message is displayed.
The invalid values must first be corrected before all values can be accepted.
component
pick-up angle [degr]
tape pocket
center of
component and
feeder division
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors) Software Version 502.xx 10/2000 Issue
404
I
t I I
13.1.3.5 Packaging Editor for Waffle Pack Trays
The waffle pack trays are defined in the Packaging Editor. It must be opened separately for each individual
waffle pack tray.
The number of the divisions in X and Y-directions are defined in the Packaging Editor. Moreover, the coordinates,
the pick-up angle and the diagonal for a given component are stated (see Fig. 13.1.14).
Fig. 13.1.14 Packaging Editor for Waffle Pack Trays
The Packaging Editor for waffle pack trays is subdivided into the following areas:
- Menu bar
- Identification field
- Editing area
editing area
menu bar
identification field