Wolfgang-Warmbier-Katalog-2020-2021-en.pdf - 第102页

102 2020/2021 IEC EN 7100.CPM35.H TEST AND MEASUREMENT CPM74 with high voltage head CHARGED PLA TE MONITOR – CPM74 • Measures the air ionizer ef ficiency and the offset voltage • Measures the electr ostatic decay time fr…

101

2020/2021

EFM

51 – CPS (CHARGED PLATE SET)

• Hand held instrument for measuring air ionizers

efficiency and offset voltage

• Measures the electrostatic decay time from

+/- 1.000 volts to +/- 100 volts

• Measures the plate potential (75x150 mm) with the attached

EFM

• Suitable for measurements inside machines

• Dimensions: 150 x 125 x 75 mm including Stand (W x H x D)

with base

Includes: EFM

51, conductive carrying case, High voltage gene-

rator +/- 1200 Volt, conductive base, charging plate,

ground connection, battery charger for 9 V batteries,

spare 9 V rechargeable battery, calibration certificate,

German and English operating instructions

Part Nr.

7100.EFM51.CPS Electrostatic ﬁ eld meter EFM

with charged plate set

7100.EFM51.CPS.SET Retroﬁ t set - Charge Plate Set

without EFM

ELECTROSTATIC FIELD METER, CHARGED PLATE MONITOR

EFM

51 – VERIFICATION KIT

Verification Kit for measuring electrostatic fields and electrostatic

charges, as well as the body voltage of a person while performing

the walking test. Additionally the decay time and the offset voltage

of ionizers can be measured.

Includes:

• EFM

51 – CPS (Charged Plate Set)

• EFM

51 – Walking Test Kit

• Calibration certificate

• Conductive carrying case

Part Nr.

7100.EFM51.VK EFM

51 with carrying case,

MK51, base, connecting cable

and charged plate set

Video

102

2020/2021

IEC

7100.CPM35.H

TEST AND MEASUREMENT

CPM74 with

high voltage head

CHARGED PLATE MONITOR – CPM74

• Measures the air ionizer efficiency and the offset voltage

• Measures the electrostatic decay time from ± 1000 V to ± 100 V

(standard setting)

• Measures the (150 x 150 mm) plate potential with a built-in

electrostatic field meter

• Plate can be removed in order to apply the high voltage

head to the field meter

• High voltage head allows direct voltage measurement

of up to 2 kV

• Size: 15,2 x 15,2 x 15,2 cm (W x H x D)

• Includes: Power supply 230 VAC, ground cord, conductive

case, operating instructions in German and English, calibration

certificate

Complies with IEC 61340-4-7

Part Nr.

7100.CPM74 Charged plate monitor CPM74

7100.CPM74.HM High voltage head, including connecting

cable

Video

CPM 35 – IONIZER TESTER

application example

application example: walking test

The CPM 35 is a handheld measuring device for the fully automatic

checking of ionizers at the ESD workstation or in machines. It

measures the positive and negative discharges as well as the offset

voltages and can also be used to measure body voltages (Walking

Test).

• Measures automatically the decay time from ± 250 V to ± 100 V

afterwards the offset voltage

• In the BVT-mode a walking test can be performed by contacting

the metal plate with a finger

Part Nr.

7100.CPM35 CPM 35 – Ionizer Tester incl.

grounding cord and carrying bag

7100.CPM35.H Rubber case incl. foldable stand

Video

103

2020/2021

IEC

7100.WIM47.SB

AIR IONIZER, IONIZER MONITOR

IONIZER MONITOR – WIM 47

The WIM 47 is a handheld monitoring device for the fully automatic

checking of ionizers at the ESD workstation or in machines.

It measures the positive and negative discharges as well as the

offset voltages.

An alarm is signaled acoustically and optically.

In case of an error a switching output can switch off the Ioniser or

report the alarm to a higher-level controller, e. g. by using the

switch box 7100.WIM47.SB.

• Size: 70 x 70 x 85 mm (W x D x H)

• Weight: 300 g

• Includes:

1 x Ionizer Monitor WIM 47

1 x Power supply with adapter (EU/USA)

1 x ground cord

1 x operating instructions

Optional:

Switch Box, which controls the

Voltage supply for the connected ionizer via a relay contact.

Part Nr.

7100.WIM47 Ionizer Monitor WIM 47

7100.WIM47.SB SwitchBox (optional) for German sockets

• Compact and portable, quickly neutralizes static charges

• Effective area up to 120 cm

• Unique emitter point cleaner

• Fan speed control “Low”, “Medium and “High”

with integrated heater

• Ionization indicator

• Inherently balanced to ± 10 V (micropulse AC ionization)

• AC technology, Ozone generation: 0,05 ppm,

measured 30 cm in front of the unit

Size: 173 x 231 x 84 mm (W x H x D)

Part Nr.

7500.PC2.H Portable Ionizer

AEROSTAT

PC2 – PORTABLE IONIZER

application example

Video