KE-2030使用说明书.pdf - 第131页
4 – 32 4.3.14 Vision Copy This command allows you to copy mark data, which is register ed onto the m ark database, as a BOC m ark or IC mar k into your dat a. (1) Copy ing as a B OC mark Step 1: Move the cursor into the …
4 – 31
When an error occurs
In the following cases, an error occurs, then the corresponding error dialog box
appears on the screen.
① When the number of data records exceeds the maximum number of records which
can be entered
• OK: terminates the copy operation. No data is copied.
② When the placement position is outside the PWB or circuit layout
• OK: Continues copying data. An range over mark is appended to the
copied data.
• Cancel: Cancels the copy operation.
③ When Pick data is not completed
• OK: Cancels the copy operation. No data is copied.
④ When the pick position is beyond the specified pick coordinates
• OK: Cancels the copy operation. No data is copied.
⑤ When the number of pick points exceeds the maximum pick points of a tray
component
• OK: Cancels the copy operation. No data is copied.
4 – 32
4.3.14 Vision Copy
This command allows you to copy mark data, which is registered onto the mark
database, as a BOC mark or IC mark into your data.
(1) Copying as a BOC mark
Step 1: Move the cursor into the cell “D =” of the menu item “BOC mk pos No.
1 (2 or 3, as desired)” on the PWB data screen.
Step 2: Select the [Edit] menu command provided with the Program Editing
utility, then the [Vision Copy] command.
The position of the cell to which a BOC mark is copied with the [Vision Copy]
command
(2) Copying as an IC mark
Step 1: Move the cursor to the cell ﾒ Mark ﾓ which indicates the IC mark
point on the Placement data screen.
Step 2: Select the [Edit] menu command provided with the Program Editing
utility, then the [Vision Copy] command.
4 – 33
The position of the cell to which an IC mark is copied with the [Vision Copy]
command
(3) Vision copy dialog box
When you select the [Vision Copy] command, the dialog box appears as shown
in the figure below.
Select mark data to be copied from the “Registration” list, then click the <Copy>
button.
Vision copy dialog box
When you click the <Copy> button, an asterisk mark (*) appears in the mark
teaching column (Mark T). When you use a KE-2030, this mark appears in both
columns for the left and right stations.