KE-2030使用说明书.pdf - 第243页
4 – 144 (6) 2000 Option Specify KE-2000 series specif ic optim ization option. Click the “2000 O ption” t ab to display the following dialog box: Figure 4.10.1.13 2000 Option Note: The "2000 Option" is an optio…
4 – 143
(5) Place Order Option
When you use the “Place order” option, you can specify the optimization option for
deciding the pick-up/placement order of components.
Figure 4.10.1.11 Place order option
Data order
Specify the placement data order in the station format that is divided and created by
the Optimization utility.
Figure 4.10.1.12 Data
• Assign in input order of Production Program File
This is the order that the Optimization utility assigned the placement data at
division.
• Assign in optimized order
The optimization order becomes the input order of Placement data.
4 – 144
(6) 2000 Option
Specify KE-2000 series specific optimization option. Click the “2000 Option” tab to
display the following dialog box:
Figure 4.10.1.13 2000 Option
Note: The "2000 Option" is an option common to the KE-2000 series of products.
Therefore, this option is invalid for this model, but it provides selectable options
2030 Mode Specifications
Specify 2030 placement mode.
Figure 4.10.1.14 2030 Mode Specification
• Parallel Mode: simultaneously places components on two
boards (default setting)
• Sequential and Mix Mode The machine places component in Simultaneous
Placement mode, and then in Sequential
Placement mode (by using the left and right
heads to place components separately).
4 – 145
MTC/MTS Tray Priority
Specify whether the same type of components are to be assigned to an MTC or
MTS or assigned with giving the components feeding speed the highest priority.
Figure 4.10.1.15 MTC/MTS Tray Priority
• Group trays with same component type together:
Assigns the same type of components to an MTC or MTS.
• Arrange trays to optimize supply time:
Assigns components to an MTC or MTS with giving the component feeding
speed the highest priority.
Comp Type A
A
A
Comp Type B
B
B
Comp Type C
C
C
Comp Type A
Comp Type B
Comp Type C
A
B
C
A
B
C
When “Group trays with same
component type together” is selected
When “Arrange trays to optimize
supply time” is selected
Figure 4.10.1.16 Example of MTC/MTS Tray Priority
PCB/Circuit
Specify whether to optimize the entire board or a circuit.
Figure 4.10.1.17 PCB/Circuit
When you select “Optimize by circuit”, the system optimizes a circuit one by one.
When you select “Optimize by PCB”, the system optimizes each circuit as if
components are assigned on a single plane board.
• Order placements from smallest to largest nozzle size
Specify whether components are placed from ones which require the smallest
nozzle or not.
When this item is checked, the system optimizes the component placement order
so that components which use the smallest nozzle are placed first with ignoring the
priority specified with the “Place order” option.