KE-2030使用说明书.pdf - 第613页
9 − 20 9.4.6 Resetting the operation information data 9.4.6.1 Resetting each screen of t he operation inf ormation W hen y ou select the [ Tool] com mand on the m enu bar, then t he [Reset] com mand on the Tool m enu whi…
9 − 19
9.4.5.4 Setting the error level
When you select the [Tool] command on the menu bar, the [The Error level is set]
command on the displayed menu, then the [Each nozzle] command, the screen
appears as shown in Figure 9.4.5.4.1.
This screen allows you to set the error level.
Figure 9.4.5.4.1 "The error level is set" dialog box
◆ If the number of times components were picked up actually exceeds the error
level you set here, the nozzle is displayed in red on the "Operation Information of
each nozzle" screen shown in Figure 9.4.5.1.1.
The signal lights lighting condition remains unchanged.
9 − 20
9.4.6 Resetting the operation information data
9.4.6.1 Resetting each screen of the operation information
When you select the [Tool] command on the menu bar, then the [Reset] command on
the Tool menu while the "Driver Operation Information" window is being displayed on
the screen, the following dialog box appears on the screen.
Figure 9.4.6.1.1 "Reset [Driver Operation Information] dialog box
When you select the [Tool] command on the menu bar, then the [Reset] command on
the Tool menu while the "Light Operation Information" window is being displayed on
the screen, the following dialog box appears on the screen.
Figure 9.4.6.1.2 "Reset [Light Operation Information] dialog box
9 − 21
When you select the [Tool] command on the menu bar, then the [Reset] command on
the Tool menu while the "Operation Information of each head" window is being
displayed on the screen, the following dialog box appears on the screen.
Figure 9.4.6.1.3 "Reset [Operation Information of each head] dialog box
When you select the [Tool] command on the menu bar, then the [Reset] command on
the Tool menu while the "Operation Information of each nozzle" window is being
displayed on the screen, the following dialog box appears on the screen.
Figure 9.4.6.1.4 "Reset [Operation Information of each nozzle] dialog box
On each dialog box above, a check box is displayed next to the data items
respectively. Select the check box of the item to be reset, then click the <OK> button
or <APPLY> button. The following dialog box appears on the screen.