CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第112页
2.16 Lubricating the Index Unit Point The lubricant for the index unit in the cam box is contained within the oil cooler on the left side of the box. Replace the oil in the oil cooler once every three years or after 12,0…
2.15 Lubricating the Rear Cover
Arrow marks in the illustration indicate lubrication points.
Note: The above drawing represents the CP-732E. Please conduct lubrication for the CP-742ME
and CP-742E in the same fashion.
C7SM3029a
(50)
(50)
(50)
(50)
(50)
(50)
(50)
(50)
Daphne Exponex No. 2 Every 3 months
T016Ea
Lubrication points
Schedule
Types of lubricant
50
Slide rail
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-20 CP-7 series Mechanical Reference
2.16 Lubricating the Index Unit
Point
The lubricant for the index unit in the cam box is contained within the oil cooler on the
left side of the box. Replace the oil in the oil cooler once every three years or after 12,000
hours of operation.
Procedure
The oil in the oil cooler can be drained at three locations. Refer to the diagram below for
guidelines on how much oil should be removed from each drain plug.
Prepare in advance a bucket for collecting the old oil, a plastic sheet with which to cover
the machine, and some corrugated cardboard.
C7SM3102
Oil cooler drain plug
(approx. 2,000 ~ 3,000 cc)
Oil inlet
(51)
Nozzle index drain plug
(approx. 1,000 cc)
Theta (θ) index drain plug
(approx. 1,000 cc)
SHC 630
Every 3 years or
12,000 hours
Oil cooler
T014c
Lubrication points
Schedule
Types of lubricant
51
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-21 CP-7 series Mechanical Reference
1. Remove the acrylic cover from the top of the machine, and remove the cap from
the oil cooler.
2. Open the cover on the rear left of the machine.
3. Remove the old cooler oil using the drain plugs. Protect the area surrounding the
drain plugs using a plastic sheet, remove the drain plug and drain the oil into a
collecting bucket.
Note: 1. Cover the machine carefully to prevent oil spilling on the machine when draining
the oil cooler.
2. The oil removed from the machine should be discarded in accordance with local
ordinances for handling waste matter.
4. Replace and properly tighten the drain plugs once the oil has been fully removed.
C7SM3103
Drain plug
Plastic sheet
<CP-732E> <CP-742E><CP-742ME>
Clear acrylic cover Clear acrylic cover Clear acrylic cover
C7SM3009c
Cap
Oil cooler
Drain plug
Part 3 Chapter 2 Lubrication
Edition 2.9 3-2-22 CP-7 series Mechanical Reference