CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第40页

3. Sensor Positions XY -table X/Y -axis C7SM1T01 SX009 SX00A SX011 SX012 X_AXIS_+OT X_AXIS_-OT Y_AXIS_+OT Y_AXIS_-OT Sensor No. SIGNAL NAME SX009 SX011 SX012 SX00A C7SM1021a Part 1 Chapter 3 Sensor Positions Edition 2.4 …

UPS (Uninterrupted Power Supply Unit)

The UPS unit is positioned in the transformer box at the rear of the machine. Under

normal circumstances, the power supply from the UPS is cut automatically when the

machine is shut down. However, if the machine is not operating correctly, the power

from the UPS unit may not always be cut. As a safety precaution when performing any

kind of electrical maintenance work, always set the switch on the UPS unit to off after

also cutting the main power supply to the machine.

Notes Regarding CP-7-series Machines Operation

Absolute encoders are used on all servo motors on the machine. Differences with other

machine types are listed below.

The harness connectors on the servo motors should not be removed. If a harness

connector is removed it will be necessary to recalibrate Proper data.

Proper data measurement is also required at the following times.

• After replacing the motor

• After removing the cable connector from between the motor and servo amp

• If the backup battery within the servo amp is dead

Zero setting is not required on the machine.

C7SM1038a

Power switch

UPS (Uninterrupted Power Supply Unit)

Part 1 Chapter 2 Functions of Each Part

Edition 2.4 1-2-4 CP-7 series Mechanical Reference

3. Sensor Positions

XY-table

X/Y-axis

C7SM1T01

SX009

SX00A

SX011

SX012

X_AXIS_+OT

X_AXIS_-OT

Y_AXIS_+OT

Y_AXIS_-OT

Sensor No.

SIGNAL NAME

SX009

SX011

SX012

SX00A

C7SM1021a

Part 1 Chapter 3 Sensor Positions

Edition 2.4 1-3-1 CP-7 series Mechanical Reference

Z-axis

C7SM1T02

SX019

SX01A

X05C

X05E

Z_AXIS_+OT

Z_AXIS_-OT

XY-TABLE LOADING HEIGHT CHECK

MAIN-LIFTER MIDDLE OT