CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第7页
Notes: About This Manual Edition 2.5 iv CP-7 series Mechanical Reference
Body
The information needed to understand the workings of the machine and how to perform
operation is explained using text and illustrations.
Page number
A three digit hyphenated number appears in the footer on each page. The first digit of
each page number indicates the part number, the second digit indicates the chapter
number within the part, and the final digit is the sequential page number within that
chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter
of part 1.
Manual name
The name of the manual that appears on the cover is also shown in the footer on each
page.
Edition number
The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after
the decimal point, for example, a change from edition 1.0 to 1.1. This
change is made on the revised pages only, and these pages can be
downloaded as required from Fuji's website.
Major revision: If major changes are made, the edition number is increased by one,
for example, a change from edition 1.0 to 2.0. This change is made on
all pages, including the cover.
Note: The reference numbers at the bottom right of the illustrations are for administrative
purposes only, and are in no way connected to the content of the manual.
Notation Conventions Used in this Manual
The notation conventions employed in this manual are described below.
[Main] screen The names of the screens that appear at the touch
screen are enclosed in brackets.
[Production] command The names of the command buttons are enclosed in
brackets, and use the verb “press”.
START button Buttons on the machine are written exactly as they
appear, and use the verb “push”.
“Production” command section The names of commands that have been grouped
together are enclosed in quotation marks.
[TAB] key Keys on the keyboard appear in brackets.
About This Manual
Edition 2.5 iii CP-7 series Mechanical Reference
Notes:
About This Manual
Edition 2.5 iv CP-7 series Mechanical Reference
Contents –
List of Current Pages
Safety Guidelines......................................................(Edition 2.6)
1. About Symbols.......................................................................................1
2. Safety Rules for All Machine Types.......................................................2
3. Safety Rules for Individual Machine Types............................................7
CP-7-series Machines..................................................................................................7
4. Safety Labels.........................................................................................8
5. The EMERGENCY STOP Buttons ......................................................12
Part 1 The Machine
1. Machine Components...........................................(Edition 2.4) ......1-1-1
Machine Components............................................................................................1-1-1
Servo Control Axes................................................................................................1-1-7
Rotary Head...........................................................................................................1-1-7
Placing Head .........................................................................................................1-1-8
PCU (Pallet Change Unit)......................................................................................1-1-8
2. Functions of Each Part..........................................(Edition 2.4) ......1-2-1
Parts Mounting System..........................................................................................1-2-1
Parts Supply System .............................................................................................1-2-2
Vision System........................................................................................................1-2-3
Panel Conveyance System....................................................................................1-2-3
Electrical Control System.......................................................................................1-2-3
3.Sensor Positions ...................................................(Edition 2.4) ......1-3-1
XY-table.................................................................................................................1-3-1
X/Y-axis ............................................................................................................1-3-1
Z-axis................................................................................................................1-3-2
In-conveyor............................................................................................................1-3-3
Out-conveyor.........................................................................................................1-3-4
Main Conveyor.......................................................................................................1-3-5
In-carrier ................................................................................................................1-3-6
Out-carrier..............................................................................................................1-3-7
Panel Clamp..........................................................................................................1-3-8
Cam Box................................................................................................................1-3-9
Tape Feeder Unit (Station 1, 2)...........................................................................1-3-10
Tape Cutter (Station 1)........................................................................................1-3-11
Nozzle Clutch (Station 10)...................................................................................1-3-12
Nozzle Changer (Station 13, 15) .........................................................................1-3-13
Feeder Check......................................................................................................1-3-14
Pallet Table..........................................................................................................1-3-16
D Servo Axis...................................................................................................1-3-16
D1 Table.........................................................................................................1-3-18
D2 Table.........................................................................................................1-3-20
Contents – List of Current Pages
Edition 2.9 v CP-7 series Mechanical Reference