CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第5页
Page Layout Each page indicates the part number, chapter number and title, section title , manual name, page number, and the edition number of the manual. Part number The part number to which each chapter belongs is show…
About This Manual
This manual contains important machine system information for the user.
The manual content is intended for specialized technicians who are familiar with Surface
Mount Technology (SMT).
Please read this manual carefully in order to ensure safe and efficient machine operation.
This manual has been written specifically for the CP-732E, CP-742ME and CP-742E.
Unless otherwise stated, all explanations apply equally to all machines.
Manual Structure
This manual consists of the following eight parts.
Safety Guidelines
Part 1 The Machine
Part 2 Basic Operation
Part 3 Maintenance
Part 4 Adjustments
Part 5 Troubleshooting
Part 6 Setup
Supplementary Information
About This Manual
Edition 2.5 i CP-7 series Mechanical Reference
Page Layout
Each page indicates the part number, chapter number and title, section title , manual
name, page number, and the edition number of the manual.
Part number
The part number to which each chapter belongs is shown on the header on each page.
Chapter number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more chapters.
Section title
Each chapter may be divided into several sections. The section number is composed of
the number of the chapter to which the section belongs, followed by a sequential number
for each section.
3. Replacing Consumable Parts
3.1 Replacing Nozzles
Point
A nozzle which becomes bent, deformed, or clogged, can cause part pick-up errors and
must be replaced. When replacing a nozzle, use care to avoid losing its internal spring.
Procedure
WARNING
Be sure to turn the main power off before performing this
procedure.
Press and turn
Remove slowly
Nozzle
Spring
C7SM3050
Part 3 Chapter 3 Replacing Consumable Parts
Edition 1.0 3-3-1 CP-7 series Mechanical Reference
Manual name
CP7MF001
Body
Edition number
Page number
Section title
Chapter number and title
Part number
About This Manual
Edition 2.5 ii CP-7 series Mechanical Reference
Body
The information needed to understand the workings of the machine and how to perform
operation is explained using text and illustrations.
Page number
A three digit hyphenated number appears in the footer on each page. The first digit of
each page number indicates the part number, the second digit indicates the chapter
number within the part, and the final digit is the sequential page number within that
chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter
of part 1.
Manual name
The name of the manual that appears on the cover is also shown in the footer on each
page.
Edition number
The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after
the decimal point, for example, a change from edition 1.0 to 1.1. This
change is made on the revised pages only, and these pages can be
downloaded as required from Fuji's website.
Major revision: If major changes are made, the edition number is increased by one,
for example, a change from edition 1.0 to 2.0. This change is made on
all pages, including the cover.
Note: The reference numbers at the bottom right of the illustrations are for administrative
purposes only, and are in no way connected to the content of the manual.
Notation Conventions Used in this Manual
The notation conventions employed in this manual are described below.
[Main] screen The names of the screens that appear at the touch
screen are enclosed in brackets.
[Production] command The names of the command buttons are enclosed in
brackets, and use the verb “press”.
START button Buttons on the machine are written exactly as they
appear, and use the verb “push”.
“Production” command section The names of commands that have been grouped
together are enclosed in quotation marks.
[TAB] key Keys on the keyboard appear in brackets.
About This Manual
Edition 2.5 iii CP-7 series Mechanical Reference