CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第114页

5. Open the doors at the rear of the machine. 6. Cover the cameras, prism box and surrounding areas with a plastic sheet. Note: Cover the machine carefully to prevent oil spilling on the machine when draining the oil coo…

1. Remove the acrylic cover from the top of the machine, and remove the cap from

the oil cooler.

2. Open the cover on the rear left of the machine.

3. Remove the old cooler oil using the drain plugs. Protect the area surrounding the

drain plugs using a plastic sheet, remove the drain plug and drain the oil into a

collecting bucket.

Note: 1. Cover the machine carefully to prevent oil spilling on the machine when draining

the oil cooler.

2. The oil removed from the machine should be discarded in accordance with local

ordinances for handling waste matter.

4. Replace and properly tighten the drain plugs once the oil has been fully removed.

C7SM3103

Drain plug

Plastic sheet

<CP-732E> <CP-742E><CP-742ME>

Clear acrylic cover Clear acrylic cover Clear acrylic cover

C7SM3009c

Cap

Oil cooler

Drain plug

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-22 CP-7 series Mechanical Reference

5. Open the doors at the rear of the machine.

6. Cover the cameras, prism box and surrounding areas with a plastic sheet.

Note: Cover the machine carefully to prevent oil spilling on the machine when draining the

oil cooler.

7. Remove the oil from the nozzle index unit drain plug.

Cover the corrugated cardboard with a plastic sheet, create a slope and drain the

contents of the nozzle index unit into a collecting bucket.

Note: The oil removed from the machine should be discarded in accordance with local

ordinances from handling waste matter.

8. Replace and properly tighten the drain plug once the oil has been fully removed.

C7SM3105

Slope

Drain plug

C7SM3104

Plastic sheet

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-23 CP-7 series Mechanical Reference

9. Open the front doors.

10. Remove the oil from the theta (θ) index unit drain plug.

Use a plastic sheet as shown in the diagram below, remove the drain plug and

drain the old oil into the collecting bucket.

Note: 1. Carefully arrange the plastic sheet to prevent oil spilling on the machine when

draining the oil cooler.

2. The oil removed from the machine should be discarded in accordance with local

ordinances from handling waste matter.

11. Replace and properly tighten the drain plug once the oil has been fully removed.

C7SM3106

Plastic sheet

Drain plug

Part 3 Chapter 2 Lubrication

Edition 2.9 3-2-24 CP-7 series Mechanical Reference